Mini Spares Articles - C-AJJ3329 Works 4 Lamp BarMSA1101 Budget Black 4 Lamp Bar

Fitting Instructions

Remove grille and overriders (if fitted the overriders can’t be refitted) Remove the centre fixing nut from the bumper, fit the centre support bracket using the bumper nut and washer, bending the bracket towards the apron mark off and drill hole after offering bar up. Loosely assemble the 2 end brackets and then check alignment. The right angled sections of the brackets bolt to the front panel and lower part of the apron. Contents: Lamp Bar Right Hand Bracket Left Hand Bracket Centre Bracket

10/12/2005

Fitting Instructions

Remove grille and overriders (if fitted the overriders can’t be refitted) Remove the centre fixing nut from the bumper, fit the centre support bracket using the bumper nut and washer, bending the bracket towards the apron mark off and drill hole after offering bar up. Loosely assemble the 2 end brackets and then check alignment. The right angled sections of the brackets bolt to the front panel and lower part of the apron. Contents: Lamp Bar Right Hand Bracket Left Hand Bracket Centre Bracket

Importation rules regarding vehicles are very specific: Only those over 25 years in age may be brought in to the USA without compilance to Federal Motor Vehicle Safety Standards (FMVSS).

Author

admin