£345.00 exc vat
£414.00 inc vat
In stock
123ignition is proud to announce the first fully programmable wireless ignition! Contr...
£345.00 exc vat
£414.00 inc vat
In stockRecommended usage 1 x C-27H7776 to fit one mini.
for 23/25D distributor but see [link]47H5250[/link} for resin type upgrade with 3m of wire as opposed to every aftermarket type analysed with only 1.5m of wire.
its worth paying extra for the condenser and rotor arm [link]GRA101]/link]
this is the original mini distributor cap where the leads were secured by screws and was fitted to the 25D range of lucas distributors. This cap had side entry leads [link[GHT101]/link] and is now only available from one or two manufactures owing to ...
Wiper Swithch MK1/2/EARLY MK3 blade type switch for using to convert to 2 speed wipers when current 2 speed wiper motor is used.
Brand new Inertia starter with the correct 9 tooth pinion for all minis up to the fitment of the pre engaged type in 1984/5. Do not fit the 10 tooth starter sold by many as it can ruin the ringear or the bendix. Other leyland cars used 10 teeth such ...
Kit includes 2 original rear lower lens in white with reflectors plus 2 upper lens in white for the modern day look. Included are the 4 bulbs required to make the kit legal.
The lens seals are available individually as XFH100460...
IGNITION BARREL TO FIT 13H337 SWITCH. MK1/2/EARLY MK3. ONE BARREL,TWO KEYS
This front turn lamp assembly was used on all Mkl & Mkll Saloons, all Vans and Pick-Ups. It is also an easy installation on later cars seeking that proper sixties look. Includes amber glass lens, chrome surround and rubber boot. The clips to hold thi...
Fitted to cars with the reverse lens built into the rear lamp which became standard in 1976, this is the Right hand seal between the lamp and the car body.
The headlamp bucket is isolated from the body with these rubber seals/gaskets.
Fitted to cars with the reverse lens built into the rear lamp which became standard in 1976, this is the L/H seal between the lamp and the car body.
Made in the UK. Correct fitting stainless steel type with screw and washer at a special low price for any Lucas or Wipac headlight including injection cars.
A headlight trim ring is only the starting point of a good looking car, but you have...
Headlamp sundries kit.
Includes two adjuster screws, plastic nutserts, pullback spring. Two kits are required per car.
This is known as a metalastic type bush as it is metal on the outside and inside with a layer of rubber between. Used on the rear rod change gearbox as a stabiliser bush for the rod change it is also used on our rear anti roll bar kits where appropri...
Pair of Chrome WIPAC spotlights. 135mm in diameter, 60mm deep with covers. The lamp is nearly all forward of the mounting bracket making it great for fitting in front of mini grilles. Bulbs are H3 type 55 watts GLB453.
Thermal transmitter fitted in the cylinder head from 1970 on until its demise on the 1990 Coopers this part was the same as GTR143. One number was original fitment and the other supplied as the spare part by Unipart.
Fits 998 1275 and cooper...
A plastic lamp spade connection with sidelight bulb aperture for use on sealed beam units only. Uses a GLB501 capless bulb. The mini clubman used sealed beams but had independant side lamps and therefore had an equivalent unit less the s...
Black wiper arm for R/H/D with a hook type fitting introduced in 1990. This uses an 11" blade GWB911 made by Bosch which is the best we have found. Sold singly. Will fit any cars from 1970 on with correct blade.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.