£56.55 exc vat
£67.86 inc vat
In stock
Since then the same basic grille can be fitted to all later models of the Mini
but this has no dished top slat to allow opening of the bonnet. Therefore you will require an internal bonnet release as fitted to LATER minis. The flat slatted grille has nicely finished aluminum bars on a black platform.
Owing to its multi slat grille design, it is harder to fit the surrounds but we have now modified them by removing some material on the back of the slats. Check you have metal on the front panel to accept screws. Just removing indicator lamps on some models helps the fitment of surrounds when the grille is on car, but make sure you have the plastic seatings 37H8108 fitted or you will damage your paintwork.
£56.55 exc vat
£67.86 inc vat
In stockRecommended usage 1 x DHB102140MMM to fit one mini.
Known as the top grille moulding. This part actually attaches to the lip on
the bonnets for MK2 Minis 1968 onwards to present day. This is a Mini Spares made item as supplied to Rover and not to be confused with the slightly cheaper type ava...
Genuine Mini spares item as supplied to Rover and not to be confused with the poor quality ill-fitting aftermarket type available which albeit,are only slightly cheaper to buy. This Minispares top quality item is a very needed finishing touch to the ...
genuine Mini Spares item as supplied to Rover and not to be confused with the poor quality ill-fitting aftermarket type available which albeit,are only slightly cheaper to buy. This Minispares top quality item is a very needed finishing touch to the ...
This MK2/3 grille will fit any car from 1968 on with external bonnet catch hole. The 11 thin flat slatted grille has nicely finished aluminum bars on a black platform. This grille was standard on all Cooper S MK3 versions.
For the later type...
As per Grille02 but supplied with the later internal release grille DHB102140MMM
The 5 No6 1/2" long screws are for the top moulding.
The 4 short No6 3/8"screws are 2 per side surround.
8 of No10 screws are supplied to att...
As per Grille02 but supplied with the later internal release grille DHB102140MMM
The 5 No6 1/2" long screws are for the top moulding.
The 4 short No6 3/8"screws are 2 per side surround.
8 of No10 screws are supplied to att...
Austin Mk1 grille with half top slat for external bonnet release. It is complete with chrome over brass grille surround as per original material and
modified to fit all later genuine panels. Kit includes grille,surround, end whisher moulding...
Slat type front grille section for mini van which will need trimming before welding into recess of either an original damaged front panel or a saloon version.
It is sold as a grille size panel and can be fitted as such when painted with [li...
Grille surround set, bonnet moulding and 2 side pieces plus chrome plastic seating strips and screws for all Mk2 grilles from 1968 to the last production models in 2000.
This kit includes the special shaped chrome plastic seating pieces for...
This kit includes the Cooper S grille and 3 surrounds with the screws and the mouldings behind the grille surrounds ---see GRILLE05 for later full slat grille when using internal cable type bonnet release.
The 5 No6 1/2" long sc...
Grille Buttons
Take it easy, make it easy, do it easy! Upgrade your Mini regardless of year for "ease" of removal of your grille!
The solution for many years has been these simple "Grille Buttons". Now in colour!
The 3 surrounds only for the MK2 on grilles.
See GRILLE10 for the same 3 surrounds but with the plastic finishers and fitting screws at a super price.
This kit includes the grille and 3 surrounds with the screws and mouldings behind the grille.
The 5 No6 1/2" long screws are for the top moulding
The 4 short No6 3/8"screws are 2 per side surround
8 of No6 screws are to a...
Black grille as fitted in the 1980s will fit any saloon car from 1967 on.
11 thin slats similat to ALA6654MS but in black
This is the cheapest genuine type grille available and is available with
surrounds. See...
Morris Cooper and S grille. The wide slats are made in automotive type 430 stainless steel which means any stains created where it would attach to ordinary metal can be polished out. If you fit an internal bonnet locking kit there is a grille [link]2...
Grille Buttons.
Take it easy, make it easy, do it easy. Upgrade your Mini regardless of year for "ease" of removal of your grille.
MkI "moustache"(mustache in USA) chrome surround for the MkI grille.
This item is in deep chrome on brass as per the original 1960s type to help prevent rusting. It has now been modified to fit with our grilles to all genuine front panels ...
genuine Mini Spares item as supplied to Rover and not to be confused with the poor quality ill-fitting aftermarket type available which albeit,are only slightly cheaper to buy. This Minispares top quality item is a very needed finishing touch to the ...
Genuine Mini spares item as supplied to Rover and not to be confused with the poor quality ill-fitting aftermarket type available which albeit,are only slightly cheaper to buy. This Minispares top quality item is a very needed finishing touch to the ...
This is a complete moustache kit to fit all MK1 grilles to any genuine rover front panels. The fixing lugs on the 14A7781retro surround are deeper to fit into the recess formed on front panels. The bonnet moulding and its fitting platfor...
Known as the top grille moulding. This part actually attaches to the lip on
the bonnets for MK2 Minis 1968 onwards to present day. This is a Mini Spares made item as supplied to Rover and not to be confused with the slightly cheaper type ava...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.