£24.57 exc vat
£29.48 inc vat
In stock
winged motif(BMW trade mark)
£24.57 exc vat
£29.48 inc vat
In stockRecommended usage 1 x XBV100610 to fit one mini.
Pair of high power Chrome Fog lights. 5.5"( 135mm )diameter, 50mm deep with durable plastic covers. Universal fitting. The lamp is nearly all forward of the mounting bracket making it great for fitting in front of mini grilles. Bulbs are H3 type 55 w...
Kit consisting of LA1009 halogen driving lamps approx 170mm wide by 58mm deep with 2 stainless steel brackets.
Minispares design heavy duty STAINLESS STEEL spotlight bracket, for fitting to cars where it mounts on the front panel valance and grille support panel, giving it perfect rigidity so that the power of the lamp was not impaired. Many cheap aftermarket...
You should always use this kit for fitting any auxiliary spot or fog lamps.
Kit contains wiring and safety relay-cheaper than a burnt out engine compartment.
Please note, SPI and MPI cars have this facility built as standard safety ...
Pair of Chrome WIPAC spotlights. 135mm in diameter, 60mm deep with covers. The lamp is nearly all forward of the mounting bracket making it great for fitting in front of mini grilles. Bulbs are H3 type 55 watts GLB453.
Reverse Light
Most early Minis did not come stock with a reverse light. This hanging light from Unipart will do the job! It can be conected direct to you gearbox by using
GAE191 switch on rod change gearboxes only.
3" high ...
Rear fog lamp bracket which attaches to the rear valance. Left hand drive only
If you have fitted the old type overiders and corner bars for the Retro look you will need to fit a modified bracket which is basically the right hand drive brac...
One pair of plastic covers to go over your original Rover spotlamps with Cooper laurel motif.
rear fog lamp bracket which attaches to the rear valance -right hand drive only.
If you have fitted the old type overiders and corner bars for the Retro look you will need to fit a modified bracket MSS024 which is basically the left hand dri...
NOW N.L.A Was fitted as original equipment- check whether you have spot or fogs-standard on injection cars. 150mm diameter with lugs at top and botton which means it will not fit our spotlight grilles and is approx 65mm deep. This is made to fit the...
NOW N.L.A Was complete with wiring.Fitted as original equipment check whether you have spot or fogs-standard on injection cars.(number on lens 048025 )
150mm diameter with lugs at top and botton which means it will not fit our spotlight gril...
Late model cars have these bright red auxiliary "safety lights" mounted below the rear bumper. They are to be switched on during inclement weather. Upgrade for your safety, a legal rquirement on late cars.
These plugs are for the 3/8" holes in the front panel where the spot or foglamp brackets would be fitted, on late front panels.
Interior lamp with a black on/off switch and pointed torpedo ends.
Also fitted many of the 1959on range of Austin A55/60 Cambridge, MG Magnette etc.
Also there was an alternative lamp with black switch and square ends 13H192 which w...
Pop rivet for fixing the headlamp bowl to the wing. Great for MS14 metal bowl but be careful if using on plastic bowls
rear stop and tail lamp for early BMc cars with red plastic lens.
Also stocked is a white lens and single filament bulb equivalent for use as reverse light on kits cars and Mokes as CHM13REVERSE.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.