WIPER ARM HEAVY DUTY 11" RHD ONLY S/STEEL LH PARK-...
13H5630

($7.60) £7.60 exc vat

($9.12) £9.12 inc vat

In stockIn stock
Minispares made.These are for R/H/D only cars with 1mm thicker and 2mm wider stainless steel arms, plus a stronger spring to keep your blades firmly pushed on the screen when motorway driving or at speed.





Some Minis have right hand park, and some left hand park. (as viewed from the driver's seat.)these are left hand park only for R/H/D 1970 on.These will only accept the GWB220 11" blade and your wiper motor and wheel boxes must be in good condition. Sold Individually. 2 required per car

($7.60) £7.60 exc vat

($9.12) £9.12 inc vat

In stockIn stock

Recommended usage 2 x 13H5630 to fit one mini.
Horn & Windscreen Wiper - Qty 2
Windscreen wipers and wash - Qty 2

Recommended products

Minispares own 11" stainless steel less drag super clean wiper blades which require special upgraded arms to fit, see 13H5627 or 13H5630. Originally designed by keith Dodd as an alternative for his MPI mini they are in heavy...

Kit products

This complete kit of 11" heavy duty wiper arms, blades, jets, plugs and wiper bushes in stainless steel and chrome are for RHD cars MK3 1970 on where the wipers park on the left hand side as you sit in the car.

Pair of 11" HEAVY DUTY wiper arms and blades for RHD cars MK3 1970 on.

This is where the wipers park on the left hand side as you sit in the car.

People also bought products

A pair of black wiper arm's for L/H/D with a hook type fitting introduced in 1990, together with a pair of Bosch 11" wiper blades

A pair of black wiper arm's for R/H/D with a hook type fitting introduced in 1990, together with a pair of Bosch 11" wiper blades

Wiper mounting kit for Mk1 Mini's (3 required per car). Each kit comes with a pin, nut, 2 washers and mounting rubber.

Original shape washer jet for Mk1/2 minis. Made to the same specification as the last type made for rover parts sales with a nut on a loose thread so it can be tightened easily by hand in the engine bay without any modifications. Should be used with ...

Original MK1/2 shape Windscreen washer cycle type bottle clip, about 1964 on.

Has yours disappeared, or just disintegrated with age?

The original winguard MK1 bottle part number was ADA3833 NOW 17H2536 for MK1/2.
<...

Original MK1/2 shape with correct 1.25" small neck.

Originally made by Winguard these plastic washer bottles for early Minis were often asked for but rarely available.

The original part number for the Winguard MK1 bottle was ADA383...

Pair of 11" HEAVY DUTY wiper arms and blades for LHD cars MK3 1970 on and will fit RHD MK1/2 cars. This is where the wipers park on the right hand side as you sit in the car.

Pair of 11" HEAVY DUTY wiper arms and blades for RHD cars MK3 1970 on.

This is where the wipers park on the left hand side as you sit in the car.

Black wiper blade 11" long made to fit later hook type DKB101480/101490 arms only. Introduced in 1990 and fitted to all MPI cars. This super Bosch wiper blade, which we found to be the best available that we have tested in the market will fit hook t...

Chrome on metal wiper bezel kit. A nice upgrade from the black plastic bezel that your car came with! Complete kit includes a pair of chrome wiper wheel box finishers, chrome nuts and the rubber seals between the bezel and the body. (One cars worth)...

Brighten up your car with these chromed plinths for the wiper wheel box on MK3 Minis on to the very last models. Includes 8 sided nut for all MK3 cars 1970 on.

For MK1/2 see 37H6042C.

Black bushes for wiper wheelboxes. Sold as a wiper wheel box set(one above the windscreen scuttle cowl and one under the cowl), takes two sets per car.

To fit early Mk1/2 cars cut down the part that fits under the panel work part(this part h...

Minispares original design and concept, many people have copied these but poorly, as ours are in stainless steel with nut fittings so they seal properly and cannot be stolen .If cleaned regularly they will stay smart and bright for a lifetime. Sold ...

Minispares made R/H Park arm for all MK1/2 cars whether Left or R/Hand drive plus all L/H/D MK3 minis from 1970-1990 when they changed to black.

price is each arm(not 2)as the pictures are to show extra thickness and width.

Chrome a...

Minispares made R/H Park arm for all MK1/2 cars whether Left or R/Hand drive plus all L/H/D MK3 minis to 1970-1990 when they changed to black hook type arms.

Chrome anything looks great, but only if it is in perfect condition. These are chr...

Minispares own 11" stainless steel less drag super clean wiper blades which require special upgraded arms to fit, see 13H5627 or 13H5630. Originally designed by keith Dodd as an alternative for his MPI mini they are in heavy...

Minispares own less drag 10" wiper blades as originally fitted 1959-1996, only fit original type wiper arms 13H5629 and 13H5626.

These super new less drag wiper blades are also available to fit our special upgraded...

Minispares made L/H Park wiper arm for MK3 1970on.

Chrome anything looks great, but only if it is in perfect condition. These are

chrome bossed with stainless steel arm for long life made specifically for 10" blades GWB219...

Upper door moulding rivet for Cooper S door trim. For Mk1 usually 1 at front and 3 at back making 4 per side and on Mk2 there were 2 per end at bottom making 4 per side. This is the 10mm head rivet and not required on our own 14A9773/9774 trims that ...

Stainless steel stud for original production factory fitted sports pack arches.

These use FN105047 nuts.

New genuine arches now have an upgraded threaded brass insert and now use a stud ZUA000250.