FORGED STEEL CONROD SET 6"LONG 1.625 JOURNAL 18MM ...
C-AEG625

($690.00) £690.00 exc vat

($828.00) £828.00 inc vat

Out of stockOut of stock
High quality 817M40 forged steel conrod set. Lightweight 6" long Cooper 'S' conrod ONLY FOR USE with special race pistons using 18mm gudgeon pins. Conrod weight 450g. Bolts used are ARP 2000 bolts available as C-AEG518. Manufactured in the UK by Arrow Precision Engineering to correct lightest safe weight for rod stresses. On web site Click on "Articles" on the Home page then under Technical information click on "Engine section" for "which con rod is best"---these should contain instructions on con rod bolt torque settings which are done by the safer method of "bolt stretch" do not torque as per workshop manual on these special rods

($690.00) £690.00 exc vat

($828.00) £828.00 inc vat

Out of stockOut of stock

Alternative products
FORGED STEEL CONROD SET 6"LONG 1.625 JOURNAL 18MM ...
C-AEG625EVO

Minispares steel connecting rods are machined by Arrow Precision Eng from double air re-melted 817M40 forgings to X condition. \weight 442g

The new X rod design maintains stiffness whilst reducing weight where it is not required. ARP 2000 5/...

($1,155.00) £1.155.00 exc vat

($1,386.00) £1.386.00 inc vat
People also bought products
VALVE COTTER SINGLE GROOVE COMPETITION (1 UNIT=2 H...
88G459EVO

New competition valve cotter, these are precision CNC machined from 4340 and heat treated to a better spec than EN24T and claimed to be stronger in fatigue life.

These locate better in the valves and easier to control spring heights.

($3.96) £3.96 exc vat

($4.75) £4.75 inc vat
ROCKER COVER SILICON GASKET 11 STUD HEAD
GUG5038EVO

Upgraded rocker cover gasket made in silicon, cut outs for 11 stud head and ideal when rocker cover is removed on a regular basis.

Rarely you may require longer rocker cover bolts when fitting this so use CAM6823.

($8.75) £8.75 exc vat

($10.50) £10.50 inc vat
TOP CAP TITANIUM RACE SET(8) FOR C-AEA526/7
C-AEA530

Set of strong lightweight titanium top caps to suit our valve springs C-AEA526/527 hard for single collet competition valves. Sold as a set of 8.

($80.00) £80.00 exc vat

($96.00) £96.00 inc vat
VALVE STEM OIL SEAL AS USED ON MPI MODELS
LJQ101160

Genuine Mini Spares valve stem oil seal manufactured with original Dupont Viton, as fitted to the twin points engines, are the best material and seal you can use and although expensive are the best to date in stopping the engine smoking.

Man...

($1.20) £1.20 exc vat

($1.44) £1.44 inc vat
VALVE GUIDE SET (8) BRONZE TYPE
C-AJJ4037

New colour, PB104 bronze guides.Although Silicon bronze valve guides were used for their extremely good wear values, they were very hard and not user friendly when fitting. These valve guides are recommended when using all EN21 4N stainless steel val...

($39.00) £39.00 exc vat

($46.80) £46.80 inc vat
RACE GRADE ENGINE STEADY POLY BUSH KIT
C-STR630RACE

Extra hard bushes for competition use. All the torque action of the motor is controlled by the stabilizer arm located just above the flywheel housing. If you are still using original type rubber bushes you are living in the past. Our uprated kit incl...

($14.37) £14.37 exc vat

($17.24) £17.24 inc vat
EXHAUST VALVE 29.5mm RACE 1.161" SINGLE COLLET GRO...
C-AEG106

1.158" (29.4) diameter exhaust valve for 12G940 casting.

Our race valves are produced in EN214N and plasma heat treated to eradicate wear from unleaded petrol. They are stellite tipped and use the later narrow, single collet gro...

($18.15) £18.15 exc vat

($21.78) £21.78 inc vat
RUBBER TAPPET CHEST COVER GASKET. 1966 on
12A1175

Tappet chest cover seals for all small bore and Cooper S engines (except pre 1966 which use 12A1139). Quantity required-2 per engine.

($1.07) £1.07 exc vat

($1.28) £1.28 inc vat
INLET VALVE 35.7MM LONG STEM RACE VALVE SINGLE COL...
C-AEG544

1.402" (35.6mm) dia x 3.57" long intake valve.

Our race valves are produced in EN214N steel and are stellite tipped and use the later narrow, single collet groove and current valve head shapes. They are plasma heat treated to eradicate wear ...

($17.69) £17.69 exc vat

($21.23) £21.23 inc vat