£4.08 exc vat
£4.90 inc vat
In stock
£4.08 exc vat
£4.90 inc vat
In stockRecommended usage 2 x 8B12396 to fit one mini.
These are the rubber plugs that sit in the windscreen scuttle panel where the extra holes are drilled by the factory to enable fitment of either left or right hand parking of the wiper arms. Plus use this rubber plug for some rear floor pans and batt...
This complete kit of wiper chrome/stainless steel parts is for RHD cars MK3 1970 on where the wipers park on the left hand side as you sit in the car but the chrome nuts are different.
These are 10" type arms and blades.
See [link]...
This complete kit of 11" heavy duty wiper arms, blades, jets, plugs and wiper bushes in stainless steel and chrome are for RHD cars MK3 1970 on where the wipers park on the left hand side as you sit in the car.
This 10"blade kit is for MK1/2 plus all left hand drive cars with Right hand park, but you will have to disgard the nuts if you seek originality as this kit has 8 sided for later type cars or fit MSSK030A which has 6 sided nuts. Chrome ...
This complete kit of 11" HEAVY DUTY wiper chrome/stainless steel parts is for RHD MK1/2 and all L/H/D cars where the wipers park on the right hand side as you sit in the car, dispose the nuts as they will be the wrong type for mk1/2 which had 6 sides...
10" blade MK1/2 with 6 sided nut for R/H/D or L/H/D with original 6 sided nuts. Right hand park, but you will have to disgard the nuts if you seek originality as after 1970 they became 8 sided or order correct kit for later type cars MSSK0...
Wiper mounting kit for Mk1 Mini's (3 required per car). Each kit comes with a pin, nut, 2 washers and mounting rubber.
Original shape washer jet for Mk1/2 minis. Made to the same specification as the last type made for rover parts sales with a nut on a loose thread so it can be tightened easily by hand in the engine bay without any modifications. Should be used with ...
Original MK1/2 shape Windscreen washer cycle type bottle clip, about 1964 on.
Has yours disappeared, or just disintegrated with age?
The original winguard MK1 bottle part number was ADA3833 NOW 17H2536 for MK1/2.
<...
Original MK1/2 shape with correct 1.25" small neck.
Originally made by Winguard these plastic washer bottles for early Minis were often asked for but rarely available.
The original part number for the Winguard MK1 bottle was ADA383...
Pair of 11" HEAVY DUTY wiper arms and blades for LHD cars MK3 1970 on and will fit RHD MK1/2 cars. This is where the wipers park on the right hand side as you sit in the car.
Pair of 11" HEAVY DUTY wiper arms and blades for RHD cars MK3 1970 on.
This is where the wipers park on the left hand side as you sit in the car.
This complete kit of 11" HEAVY DUTY wiper chrome/stainless steel parts is for RHD MK1/2 and all L/H/D cars where the wipers park on the right hand side as you sit in the car, dispose the nuts as they will be the wrong type for mk1/2 which had 6 sides...
Black wiper blade 11" long made to fit later hook type DKB101480/101490 arms only. Introduced in 1990 and fitted to all MPI cars. This super Bosch wiper blade, which we found to be the best available that we have tested in the market will fit hook t...
This 10"blade kit is for MK1/2 plus all left hand drive cars with Right hand park, but you will have to disgard the nuts if you seek originality as this kit has 8 sided for later type cars or fit MSSK030A which has 6 sided nuts. Chrome ...
Chrome on metal wiper bezel kit. A nice upgrade from the black plastic bezel that your car came with! Complete kit includes a pair of chrome wiper wheel box finishers, chrome nuts and the rubber seals between the bezel and the body. (One cars worth)...
Brighten up your car with these chromed plinths for the wiper wheel box on MK3 Minis on to the very last models. Includes 8 sided nut for all MK3 cars 1970 on.
For MK1/2 see 37H6042C.
This complete kit of 11" heavy duty wiper arms, blades, jets, plugs and wiper bushes in stainless steel and chrome are for RHD cars MK3 1970 on where the wipers park on the left hand side as you sit in the car.
Black bushes for wiper wheelboxes. Sold as a wiper wheel box set(one above the windscreen scuttle cowl and one under the cowl), takes two sets per car.
To fit early Mk1/2 cars cut down the part that fits under the panel work part(this part h...
Minispares made R/H Park arm for all MK1/2 cars whether Left or R/Hand drive plus all L/H/D MK3 minis from 1970-1990 when they changed to black.
price is each arm(not 2)as the pictures are to show extra thickness and width.
Chrome a...
8 sided nut for the Mk3 wiper wheel box (37H7200)from 1970 Mk1 were 6 sided and a different thread. Also fitted 1275 sprite and MG Midget with round body wiper motor.Sold singly 2 required per car
Minispares made.These are for R/H/D only cars with 1mm thicker and 2mm wider stainless steel arms, plus a stronger spring to keep your blades firmly pushed on the screen when motorway driving or at speed.
Some Minis have...
This complete kit of wiper chrome/stainless steel parts is for RHD cars MK3 1970 on where the wipers park on the left hand side as you sit in the car but the chrome nuts are different.
These are 10" type arms and blades.
See [link]...
Minispares made R/H Park arm for all MK1/2 cars whether Left or R/Hand drive plus all L/H/D MK3 minis to 1970-1990 when they changed to black hook type arms.
Chrome anything looks great, but only if it is in perfect condition. These are chr...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.