£9.45 exc vat
£11.34 inc vat
In stock
£9.45 exc vat
£11.34 inc vat
In stockRecommended usage 2 x XBU10044 to fit one mini.
Minispares design heavy duty STAINLESS STEEL spotlight bracket, for fitting to cars where it mounts on the front panel valance and grille support panel, giving it perfect rigidity so that the power of the lamp was not impaired. Many cheap aftermarket...
Minispares design spotlight bracket fitted to cars where it mounts on the front panel valance and grille support panel giving it perfect rigidity so that the power of the lamp was not impaired. Requires a M8 metric nut. Many cheap aftermarket product...
NOW N.L.A was the lamp only less wiring.Fitted as original equipment check whether you have spot or fogs-standard on injection cars.
(number on lens 048025 )
150mm diameter with lugs at top and botton which means it will not fit our...
Pair of high power Chrome Fog lights. 5.5"( 135mm )diameter, 50mm deep with durable plastic covers. Universal fitting. The lamp is nearly all forward of the mounting bracket making it great for fitting in front of mini grilles. Bulbs are H3 type 55 w...
Minispares design spotlight bracket fitted to cars where it mounts on the front panel valance and grille support panel giving it perfect rigidity so that the power of the lamp was not impaired. Requires a M8 metric nut. Many cheap aftermarket product...
Minispares design heavy duty STAINLESS STEEL spotlight bracket, for fitting to cars where it mounts on the front panel valance and grille support panel, giving it perfect rigidity so that the power of the lamp was not impaired. Many cheap aftermarket...
You should always use this kit for fitting any auxiliary spot or fog lamps.
Kit contains wiring and safety relay-cheaper than a burnt out engine compartment.
Please note, SPI and MPI cars have this facility built as standard safety ...
Four LA1009 halogen black bodied driving lamps approximately 170mm wide by 58m deep with 4-XBU10046 stainless steel fitting brackets.
This bracket is required to re-locate standard fitment fog lamps on R/H/D cars when fitting corner bars and overiders to the rear bumper.
This is known as a metalastic type bush as it is metal on the outside and inside with a layer of rubber between. Used on the rear rod change gearbox as a stabiliser bush for the rod change it is also used on our rear anti roll bar kits where appropri...
Pair of Chrome WIPAC spotlights. 135mm in diameter, 60mm deep with covers. The lamp is nearly all forward of the mounting bracket making it great for fitting in front of mini grilles. Bulbs are H3 type 55 watts GLB453.
Copies of the originals in vinyl
Incorperating the original small clear window to show if the lamp remains switched on.
Reverse Light
Most early Minis did not come stock with a reverse light. This hanging light from Unipart will do the job! It can be conected direct to you gearbox by using
GAE191 switch on rod change gearboxes only.
3" high ...
Rear fog lamp bracket which attaches to the rear valance. Left hand drive only
If you have fitted the old type overiders and corner bars for the Retro look you will need to fit a modified bracket which is basically the right hand drive brac...
This lamp unit comes without a bracket and will fit either side, if your bracket is okay. The unit only comes from Rover with bracket but costs £29-93 so we supply it less a bracket at £10-00 savings. If you require a bracket for the right hand it is...
One pair of plastic covers to go over your original Rover spotlamps with Cooper laurel motif.
see XFE10006 for lamp only, less bracket. This is the complete fog lamp plus a seperate bracket for L/H/D cars, or when owners want two fitted and this one fits on the left hand side.
Right hand (offside) outer bracket with reinforcements to stop lamps vibrating when 4 lamps are fitted-original fitment for MPI only-central 2 brackets are XBU10044.
Sold individually
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.