INDICATOR AND SIDELAMP LENS FOR MINI CLUBMAN
BAU1796

(¥19) £18.99 exc vat

(¥23) £22.79 inc vat

In stockIn stock
Mini Clubman indicator and side light lens.



Edge of the lens are painted in Grey / Silver colour.

Colour of indicator part is light yellow.



For the orignal chrome finished edge lens with amber / orange colour indicaor,

they are only available with complete lamp ADU3017 and ADU3018.





The 28mm long screws are 518868

(¥19) £18.99 exc vat

(¥23) £22.79 inc vat

In stockIn stock

Recommended usage 2 x BAU1796 to fit one mini.
Front Lamps - Qty 2

Recommended products

gasket between lens and lamp unit on Clubman front lamp

Foam gasket that goes between the indicator/side lamp unit and front panel for all clubman models

People also bought products

INDICATOR LAMP WITH ORANGE LENS AND LED BULBS. Sold singly, 2 required per car

gasket between lens and lamp unit on Clubman front lamp

Kit includes 2 original rear lower lens in white with reflectors plus 2 upper lens in white for the modern day look. Included are the 4 bulbs required to make the kit legal.

The lens seals are available individually as XFH100460...

Domed shape indicator lamp for all minis with single filament bulb, this is the aftermarket type with a white plastic lens and for glass type there is only a side asnd indicator type lamp which is 2A9013 but a white glass lens is [link]3...

White lens kit 1988 on. If your front indicator lens is held on by screws then this is the kit for your car with the side wing repeater lens also and correct orange bulbs.

If your front lens is held on by the chrome retaining ring as per all...

The front turn signals have an easy to replace chrome ring but this is in stainless steel. Designed for CHM13 lamps with the plastic lens, it will need filing out to fit the glass lens units.Sold singly, 2 required per car.

This front turn lamp assembly was used on all Mkl & Mkll Saloons, all Vans and Pick-Ups. It is also an easy installation on later cars seeking that proper sixties look. Includes amber glass lens, chrome surround and rubber boot. The clips to hold thi...

Domed shape indicator lamp for all minis with single filament bulb, this is the aftermarket type with a plastic orange lens but if you are looking for the original glass lens type see 2A9013. Fitted up to 1986 and the clips that fit the ...

Plastic bulb holder for the wing side mounted flasher on cars from 1986 on--

make sure you change the seal AFU3112 when you dismantle these to stop water corrosion. sold singly, 2 per car required.

chrome on brass original type hexagonal screw for the chrome rear lamp BHA4153

INDICATOR LAMP WITH ORANGE LENS BUT LESS BULB. Sold singly, 2 per car

This is the side repeater lamp that first appeared on the Mini Special in 1989

and on some special edition minis and the ADO16 model Austin, Morris and MG 1100/1300. The later 1986 cars had the square lamp PRC9916A fitted.

The "Beehive" lens are used throughout the British car range! (Front and rear). Available in various colors: Clear (frosted) GLASS.


Glass "beehive" lenses, either clear or amber, were used on the front turn signals on MKI and MKII Minis...

This is the original correct colour orange (amber) lens for the side repeater lamp on the wing fitted up to the twin point cars which had white.

A white lens AHU2592W is available and fitted to 1996 on cars but remember to fit a...

Domed amber lens in plastic was used on the indicators of all minis and other BMC/Leyland cars the same size as the white lens used on alternative vehicles.

If you change to white remember to fit orange bulbs. If you require the original gla...

Glass "beehive" lenses, either clear or amber, were used on the front turn signals on MKI and MKII Minis. For best colour match they should be replaced in pairs. Part 37H6928 is clear, 37H5531 is red.

Sold singly 2 ...

Upper amber R/H lens for MK1 mini saloon. The lower red part is 47H5363. See 47H5360 screw kit also for the special screws.

This is the Non Genuine twin filament front side and indicator lamp with a clear plain plastic lens glass that was usually fitted on USA or export models. UK cars had just an amber single filament indicator with amber lens. These are complete assembl...

Domed type clear/white plastic lens for use on lamps where the lens is held in place by the rubber boot and metal rim, see 37H6928 for original glass type.Sold singly 2 required per car

This rubber boot covers the indicator/turn signal housing inside the fender. Fits the Mini and it's the same front & rear for the Bugeye sprite and various other British cars.