BLUE SILICONE TOP RADIATOR HOSE FOR 1275 EXCEPT CL...
C-GRH247

(¥20) £19.50 exc vat

(¥23) £23.40 inc vat

In stockIn stock
Unless your're heavily into the concours scene you'll love these hoses. These silcone hoses will withstand higher temps and pressures and will last virtually forever. Made to fit 1275cc cylinder head the length is made to cover 1275cc engines including Cooper S range. For Clubman 1275GT or Turbo with 1"bore thermostat see C-GRH469 which is a longer version of this hose but could be cut to length for Cooper S or any 1275cc variant etc. Use old hose as a template. If you have a sandwich plate fitted under the thermostat housing a correct length 1" bore hose is available as C-GRH1212 which is especially shaped so it does not rub on the bonnet strengthening plates.

See complete kit c-GRH002 with bottom hose and heater hoses.

(¥20) £19.50 exc vat

(¥23) £23.40 inc vat

In stockIn stock

Recommended usage 1 x C-GRH247 to fit one mini.

Recommended products

Perfect size hose clip for all Pre Injection car radiator hoses except GRH1140 Cooper top hose which takes GHC913 which will wind down to fit all hoses also.Sold individually

Alternative products

Unless your're heavily into the concours scene you'll love these hoses! These silcone hoses will withstand higher temps and pressures and will last virtually forever! Made to fit 1275cc cylinder head the length is made to cover 1275cc engines includi...

Unless your're heavily into the concours scene you'll love these hoses! These silcone hoses will withstand higher temps and pressures and will last virtually forever! Made to fit 1275cc cylinder head the length is made to cover 1275cc engines includi...

Kit products

Radiator hose kit for all pre 1989 1275cc Minis except clubman which has a longer top hose. the kit has top and bottom radiator hoses and two lengths of heater hoses(1m and 1.2m long)…all in shiney blue Silicone. These should last forever and not deg...

People also bought products

Original 7/16" spring type hose clip as used on later cars (approx 1990 on) for some radiator hoses and fuel lines.

Silicone heater hose, 39")1metre) for cars with the inline type heater valve or a straight take off on the cylinder head as fitted to post 1984 cars.

Unless your're heavily into the concours scene you'll love these hoses! These silcone hoses will withstand higher temps and pressures and will last virtually forever! Made to fit 1275cc cylinder head the length is made to cover 1275cc engines includi...

Unless your're heavily into the concours scene you'll love these hoses! These silcone hoses will withstand higher temps and pressures and will last virtually forever! Made to fit 1275cc cylinder head the length is made to cover 1275cc engines includi...

Red Silicon bottom Hose- Unless you're heavily into the concours scene you'll love these hoses! These silicone hoses will withstand higher temps and pressures and will last virtually forever! And if you ever had to replace a lower hose you'll appreci...

Black Silicon Bottom hose- Unless you're heavily into the concours scene you'll love these hoses! These silicone hoses will withstand higher temps and pressures and will last virtually forever! And if you ever had to replace a lower hose you'll appre...

Radiator hose kit for all pre 1989 1275cc Minis except clubman which has a longer top hose. the kit has top and bottom radiator hoses and two lengths of heater hoses(1m and 1.2m long)…all in shiney black Silicone. These should last forever and not de...

Water pump fitting kit for models without bypass facility, includes new bolts, washers and superseal gasket.

Radiator hose kit for all pre 1989 1275GT Clubman Minis where the top hose is slightly longer. This kit has top and bottom radiator hoses and 2 lengths of heater hoses…all in shiney blue Silicone that should last forever and not degrade with heat, ti...

5/8" straight connector piece for heater hose modifications on late minis.

Useful when re-routing hoses or joing hoses.

Long lasting silicon by pass hose between cylinder head and water pump.

These are easy to cut and slide on easier than the old conventional rubber type.

It has been made this length to fit 1275cc engine,which used the longest hose.<...

Perfect size hose clip for all Pre Injection car radiator hoses except GRH1140 Cooper top hose which takes GHC913 which will wind down to fit all hoses also.Sold individually

Silicon upper hose for 1275 GT. This is the same shape as the cooper S C-GRH247 but just over 1/2" longer--we have also increased the thermostat end slightly for ease of fitment and use on specials including Turbos with 1" bore thermosta...

long lasting pretty looking lower radiator hose for the single point injected cars only. If you have to change this hose you will have wished it had a longer lasting heat defying hose alreday fitted. Easier to fit as silicon is more flexible and slid...

long life silicon top radiator hose for the single point injection cars and HIF38 Carb cars.

This is made to fit cars with a thermostat sandwich plate and has a slightly different shape from the Cooper S and 1275 top hose where the thermosta...

Super long lasting silicon hose

this lower radiator hose is for Cooper cars with HIF44 Carb built between 1990 and 1991-Not Injection

Heater hoses came out on r/h of heater and behind the heater and into the engine bay on the L/H si...

This hose has the large outlet one end to fit the special thermostat housing

fitted to the Carb type Cooper.

Top Radiator Hose.

Unless your're heavily into the concours scene you'll love these hoses. These silcone hoses will withstand higher temps and pressures and will last virtually forever. Made to fit any 850/998/1100cc minis plus HIF38 carb c...

A much better looking under bonnet item this bright blue hose will last much longer than rubber -made in silicon-will fit original plastic type radiator outlets or latest metal type outlets.