Mini Spares Articles - 14A7630–CHANNEL+14A7631

Vertical rear moulding for the Estate and Traveller rear side windows.

14.4375” or 367mm With the double row channel grooves facing upwards. This is a side view elevation. This channel will require the ends to be cut exactly as above to the original angle of 20 degrees and the correct length as shown which ensures the best fitment. As the material is not the easiest to cut cleanly it is recommended that a new hacksaw blade or good quality snips are used and the channel grooves are packed with wood splints. Alternatively, you can use your old original sample as a template. 14A7631 – FRONT VERTICAL MOULDING HAS SQUARE ENDS, 340MM LONG Alternatively, use your old original sample as a template

12/3/2005

Vertical rear moulding for the Estate and Traveller rear side windows.

14.4375” or 367mm With the double row channel grooves facing upwards. This is a side view elevation. This channel will require the ends to be cut exactly as above to the original angle of 20 degrees and the correct length as shown which ensures the best fitment. As the material is not the easiest to cut cleanly it is recommended that a new hacksaw blade or good quality snips are used and the channel grooves are packed with wood splints. Alternatively, you can use your old original sample as a template. 14A7631 – FRONT VERTICAL MOULDING HAS SQUARE ENDS, 340MM LONG Alternatively, use your old original sample as a template

Importation rules regarding vehicles are very specific: Only those over 25 years in age may be brought in to the USA without compilance to Federal Motor Vehicle Safety Standards (FMVSS).

Author

admin