($89.37) £89.37 exc vat
($107.24) £107.24 inc vat
($89.37) £89.37 exc vat
($107.24) £107.24 inc vat
Recommended usage 1 x 56-9320 to fit one mini.
Ramair’s hugely successful range of filter kits, designed to bolt directly to the carburettor body, is used widely in both competition and street applications. The element is of sturdy construction, supported by a stainless steel cage and provides ma...
Minispares original filter fits all single and twin point injection models
sold at nearly half the retail price.
Minispares branded filter from the original and approved Rover/Unipart supplier until 2014
Minispares brand air filter element from the original approved and designated Rover/Unipart source.This air filter originated on the Metro range but was used from 1990 on any minis fited with a HIF type SU carbs that have the integral float bowl in i...
Large air filter element for Mini with HS4 carb which is visible through the center of plastic filter case,also Austin America, MKIII Canadian
For the equivalent K&N cleanable element see E-2601.
Minispares product fro...
special offset cone type filter for HS6 carbs only -about 2.5" deep
Pancake type filter from K&N which has offset holes giving clearance for fitting to HS2 carbs under a mini bonnet. 47mm deep
Fits in place of the oil pick up retainer plate on the back of the gearbox this magnetic plug filter collects metal debris from going back into the power unit but should be regularly cleaned. Also available as the ultimate is the same item with a bui...
Yes, air filter elements should be replaced-about once a year or more often with a lot of rural miles. If your engine runs better without the filter its well past time for a new one. This is the same 37mm high element that fits single HS2
Pipercross KK150 chrome top, low-conical, foam air filter for 1.5" SU carb.
Full flow, high capacity competition foam air filters; the KK range of Pipercross high performance air filters offer the ultimate in engine filtration, and are ...
Pipercross KK150 chrome top, low-conical, foam air filter for 1.25" SU carb.
Full flow, high capacity competition foam air filters; the KK range of Pipercross high performance air filters offer the ultimate in engine filtration, and are...
Just what injection engines require, this element will increase the breathing
to the engine which can only result in better performance all round. Once fitted these special elements can last nearly a life time if cleaned and oiled regularly ...
Chrome top crankcase vent filter with metal 1/2" inlet flange, 47mm filter diameter x 1.5" high(40mm). Another cleanable filter from K&N.
Not for autos, this kit usually gives true power gaims of upto 6BHP. For the single point injection cars only with a single air hose. The twin point needs 2 hoses and is kit 57-0189.
central fitting for HS2 carbs where there is enough clearance underneath some as Morris 1000 and sprite /midget. Not for mini as there is not enough lower clearance
For 1-1/4" carb applications, this Conical K&N filter is the answer. Fits single or dual carb setups. Sold individually.
K&N airfilters are unsurpassed in performance yet are compact in size to fit in even the most cramped quarters.
Highly polished chrome cover cone filter.
The cotton gauze filter design from K&N provides positive gain that you would expect. Average filter life is 100,000 miles.
'Conical' 5.875" diameter x 2" high, fits 1.75" SU carb.
...
Fits in place of the oil pick up retainer plate on the back of the gearbox this magnetic plug with filter collects metal debris from going back into the power unit but should be regularly cleaned. A non filter type of theis version is available as [l...
Sticker for the front edge of the twin carb air cleaner case. All Cooper and S models used this type.
Chrome pancake air filter for 1.5" SU. 5.5" diameter, offset mounting, 1" (+0.5" nuts) thick.Washable, reuseable filter element.
Many SU carb users (stock on all Spridgets) found their car equipped with pancake air cleaners. These have been ...
The stock air cleaner housing for many Minis with single 1 1/2" SU carbs have historically been stuck with the paper filter. New from K&N is a replacement element for FZX3013 and all HIF that provides the benefits of K&N cleanable filtra...