SILICONE TOP RADIATOR HOSE FOR 1275 except 1275GT ...
C-GRH247RED

($19.50) £19.50 exc vat

($23.40) £23.40 inc vat

In stockIn stock
Unless your're heavily into the concours scene you'll love these hoses! These silcone hoses will withstand higher temps and pressures and will last virtually forever! Made to fit 1275cc cylinder head the length is made to cover 1275cc engines including Cooper S range. For Clubman 1275GT or Turbo with 1"bore thermostat see C-GRH469 which is a longer version of this hose but could be cutg to length for Cooper S or any 1275cc variant etc. Use old hose as a template. If you have a sandwich plate fitted under the thermostat housing a correct length 1" bore hose is available as C-GRH1212 which is especially shaped so it does not rub on the bonnet strengthening plates.

See complete kit c-GRH002 with bottom hose and heater hoses.

($19.50) £19.50 exc vat

($23.40) £23.40 inc vat

In stockIn stock

Recommended usage 1 x C-GRH247RED to fit one mini.

Kit products

Radiator hose kit for all pre 1989 1275cc Minis except clubman which has a longer top hose. the kit has top and bottom radiator hoses and two lengths of heater hoses(1m and 1.2m long)…all in shiney red Silicone. These should last forever and not degr...

People also bought products

Original 7/16" spring type hose clip as used on later cars (approx 1990 on) for some radiator hoses and fuel lines.

Silicone heater hose, 1 Metre for cars with the inline type heater valve or a straight take off on the cylinder head as fitted to post 1984 cars.

Radiator hose kit for all spi Minis. This kit has top and bottom radiator hoses and 2 lengths of heater hoses…all in shiney red Silicone that should last forever and not degrade with heat, time and environment. This kit is ideal for both the racer wh...

Red Silicon bottom Hose- Unless you're heavily into the concours scene you'll love these hoses! These silicone hoses will withstand higher temps and pressures and will last virtually forever! And if you ever had to replace a lower hose you'll appreci...

Black Silicon Bottom hose- Unless you're heavily into the concours scene you'll love these hoses! These silicone hoses will withstand higher temps and pressures and will last virtually forever! And if you ever had to replace a lower hose you'll appre...

Silicone heater hose, 42" for cars with the original heater valve bolted on the cylinder head.

Cars after 1976 require one of this 42" length and one C-GRH1006 39" length.

Cars from late 1984 to 1988 had 5/8" outlets on...

Silicone heater hose, 42" for cars with the original heater valve bolted on the cylinder head.

Cars after 1976 require one of this 42" length and one C-GRH1006 39" length.

Cars from late 1984 to 1988 had 5/8" outlets on...

Silicone heater hose, 39" for cars with the original heater valve bolted on the cylinder head.

Pre 1976 cars can use 2 0f these lengths, commonly known as 1/2" bore heater hose. also see C-GRH1007 for the longer 42" hose on 1976...

Radiator hose kit for all pre 1989 1275GT Clubman Minis where the top hose is slightly longer. This kit has top and bottom radiator hoses and 2 lengths of heater hoses…all in shiney red Silicone that should last forever and not degrade with heat, tim...

Radiator hose kit for all pre 1989 1275cc Minis except clubman which has a longer top hose. the kit has top and bottom radiator hoses and two lengths of heater hoses(1m and 1.2m long)…all in shiney red Silicone. These should last forever and not degr...

Made for small bore Mk2 minis except clubman these super flexible hoses are easier to fit than rubber and last so much longer. See C-GRH003 also for all 998 Clubman and original MK1 radiator with longer top hose which measures 7" long (c...

Water pump fitting kit for models without bypass facility, includes new bolts, washers and superseal gasket.

Radiator hose kit for all pre 1989 1275GT Clubman Minis where the top hose is slightly longer. This kit has top and bottom radiator hoses and 2 lengths of heater hoses…all in shiney blue Silicone that should last forever and not degrade with heat, ti...

5/8" straight connector piece for heater hose modifications on late minis.

Useful when re-routing hoses or joing hoses.

Long lasting silicon by pass hose between cylinder head and water pump.

These are easy to cut and slide on easier than the old conventional rubber type.

It has been made this length to fit 1275cc engine,which used the longest hose.<...

Perfect size hose clip for all Pre Injection car radiator hoses except GRH1140 Cooper top hose which takes GHC913 which will wind down to fit all hoses also.Sold individually

long life silicon top radiator hose for the single point injection cars and HIF38 Carb cars.

This is made to fit cars with a thermostat sandwich plate and has a slightly different shape from the Cooper S and 1275 top hose where the thermosta...

Water hose pipe clip for the GRH1140 top hose and twin point injection cars which had larger hoses fitted .This clip will wind down to fit most radiator hoses if required.

Reinforced in kevlar for longevity as standard rubber hoses seem to be poor quality these days. This is not the true strand kevlar hose we use in GRH240KEVLAR bottom hose.This has a longer radiator end than the cooper S and other 1275cc ...

Real Kevlar stranded hose,2 year guarantee-the only true Kevlar threaded hose available where you can see the strands, it is made for longevity and low heat transfer making this the best selling bottom hose in the market.

The built in proper...