FAN BELT ALTERNATOR when CAM6408 pulley and altern...
GCB10838

£5.79 exc vat

£6.95 inc vat

In stockIn stock
Fit minis with latest A plus water pump pulley 4.75"wide CAM6408 and an alternator. Mainly used on 998cc. This belt is slightly longer than GCB10825 so always keep a spare so you know which size belt fitted your car best. Latest cogged type for better grip to eradicate slipping.

£5.79 exc vat

£6.95 inc vat

In stockIn stock

Recommended usage 1 x GCB10838 to fit one mini.
Water Pump, Pulleys & Ancillaries - Qty 1
Water Pump and thermostat - Pre 1996 Not MPI - Qty 1
Alternators and Starter - Qty 1

People also bought products

Proper timing of the camshaft is very important and while it is easy and nice to do it with a precise adjustable cam sprocket it is also cheap to do it with offset cam keys. 1 or 2 degrees difference in cam timing can make a difference in performance...

Proper timing of the camshaft is very important and while it is easy and nice to do it with a precise adjustable cam sprocket it is also cheap to do it with offset cam keys. 1 or 2 degrees difference in cam timing can make a difference in performance...

Proper timing of the camshaft is very important and while it is easy and nice to do it with a precise adjustable cam sprocket it is also cheap to do it with offset cam keys. 1 or 2 degrees difference in cam timing can make a difference in performance...

Proper timing of the camshaft is very important and while it is easy and nice to do it with a precise adjustable cam sprocket it is also cheap to do it with offset cam keys. 1 or 2 degrees difference in cam timing can make a difference in performance...

woodruff key to fit in the camshaft to hold the larger timing chain gear. See 6K836 for the crankshaft keyway for the lower smaller timing chain gear

Proper timing of the camshaft is very important and while it is easy and nice to do it with a precise adjustable cam sprocket it is also cheap to do it with offset cam keys. 1 or 2 degrees difference in cam timing can make a difference in performance...

Woodruff key for the end of the crankshaft to locate the lower timing chain gear and WKN505 is for the camshaft key to hold the larger timing gear.

Lightened cam gear duplex timing gear and chain set. Not recommended for race/rally applications. approx 69-70g 9% lighter

General: Camshaft Drive Systems


For highly tuned engines always use steel duplex as cast is nowhere as st...

For high performance engines an efficient crank damper is a necessity to reduce failure. The standard damper commonly used is barely adequate for the standard engine. Mini Spares has reproduced the original "S" damper and pulley-far superior to the s...

Latest type grooved fan belt that fits special grooved pulleys on twin point cars only for better life expectancy. See kits C-AEA538 and C-AEA538A to convert earlier cars to this sort of set up.

This thinner crankshaft oil seal was used on the later belt drive kits with a plastic cover and larger diameter crank gear

For minis with latest A plus water pump pulley CAM6408 (4.75" wide) and an alternator. This belt is slightly shorter than GCB10838 so always keep a spare so you know which size belt fitted your car best. This seemed to be fi...

Standard cast duplex gear set from the original AE supplier. for road use only.

Found to be the best fitting in Mini Mag feature Autumn 2007.

Driving the cam and controlling the timing relationships between the cam and the crank i...

Lower rubber seal for belt-drive timing gear.

Timing belt camshaft drive systems have been around for a number of years, in fact for a lot longer than the life expectancy of the belts. If you have a belt drive conversion you should have one of these replacement belts. If you want to keep things ...

Keyed or cupped, either variety does the job. A plus engines use a TAM2020.

Fitted to most cars pre 1980 with either dynamo or alternator, plus 998 from 1985 and 1275 from 1990 when smaller pulley CAM6239 was used, this was mainly on automatic cars.

CAM6239 pulley 3.875" wide and CAM6408 pu...

Countersunk screw for holding the front palte to the crankshaft bearing cap on cars fitted with duplex gears to give the clearance required. 2 required per car.

Unpainted crank pulley for high performance engines, an efficient crank damper is a necessity to reduce failure. The standard damper commonly used is barely adequate for the standard engine. Mini Spares has reproduced the original "S" damper and pull...

Vibration Harmonic Damper-original style-less inner metal timing plate on A PLus

Alternative is 12A367 and C-AEG454

It might surprise you to know that the A-Series engine has a vibration problem! But the f...