This kit allows the Minispares Alloy 4 Pot Calipers  ( C-AJJ4022 / C-AJJ4023 ) to be used with the vented discs from the Metro.

Contained in the C-AJJ4021 spacer kit are the following:

• 4 Spacers
• 8 ‘O’ Rings
• 8 Bolts
• Pad Pins and Retaining Plates

When using the vented brake kit with 10” wheels the Metro brake disc will need machining down from 8.4” to 7.5” and the fitment of Minispares drive flange ( NAM6450F )

Important Notes for Fitment :
Loctite 243 should be used on the threads of the 8 supplied Allen bolts. Allen bolts should be tightened to a torque of 39nm.

Replacement seals ( 17H7680 ) must be fitted if ever the caliper halves are split in the future.

The old brake fluid in the system must be drained completely once the old calipers have been removed as it may be contaminated with rust and water which could damage the new caliper seals or become lodged under the bleed screw taper causing bleeding / weeping problems.

Brake Eezibleed Kit ( MSA1000 ) is recommended for fluid draining. Please Note: that failure to follow the above advise could deem your warranty invalid.