MAINS SET STANDARD PRE A PLUS/EARLY A+ 1275 ACL RA...

ACL Race Bearings

ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

£71.78 exc vat

£86.14 inc vat

BIG ENDS SET 998/1098/970/1071/ COOPER "S" ACL RAC...

C-AEB572-00

ACL Race Bearings

ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

£66.27 exc vat

£79.52 inc vat

2° OFFSET WOODRUFF KEY

WKN2OSET

Proper timing of the camshaft is very important and while it is easy and nice to do it with a precise adjustable cam sprocket it is also cheap to do it with offset cam keys. 1 or 2 degrees difference in cam timing can make a difference in performance...

£10.50 exc vat

£12.60 inc vat

1° OFFSET WOODRUFF KEY

WKN1OSET

Proper timing of the camshaft is very important and while it is easy and nice to do it with a precise adjustable cam sprocket it is also cheap to do it with offset cam keys. 1 or 2 degrees difference in cam timing can make a difference in performance...

£10.50 exc vat

£12.60 inc vat

3° OFFSET WOODRUFF KEY

WKN3OSET

Proper timing of the camshaft is very important and while it is easy and nice to do it with a precise adjustable cam sprocket it is also cheap to do it with offset cam keys. 1 or 2 degrees difference in cam timing can make a difference in performance...

£10.50 exc vat

£12.60 inc vat

ENGINE TO GEARBOX NUT AND BOLT KIT

MSSK060

Complete nut, bolt and washer set for engine to gearbox only

£3.50 exc vat

£4.20 inc vat

GEARBOX STABILISER R/H KIT

MSSK

Lower Stabilizer Kit, RH.

Designed as an almost mandatory addition to any Mini with a rod change transmission, extra stabilizers will greatly aid any car. In stock form the control is left to the upper stabilizer. This often results in not o...

£23.14 exc vat

£27.77 inc vat

1275 STD BORE PISTON 10-1cr SINGLE

P21253-00

Low drag 1275 piston standard size 2.780 (Rings included).

This piston has a possible compression ratio of 10.3:1 as fitted to Cooper RSP 1990.

The best performance 1275 pistons are C-STN100 range which have 9.73cr when the piston i...

£67.50 exc vat

£81.00 inc vat

TIMING COVER GASKET "GENUINE" PRE A+

GUG705803GM

Genuine Mini Spares Klinger timing chain gasket for any BMC A series engine with 10 gasket holes, fitted until the introduction of the A plus type which had a bulge in its side where the tensioner was fitted which had 11 holes.

The klinger m...

£4.70 exc vat

£5.64 inc vat

HYLOMAR 100G TUBE

GGC102

Probably the most used jointing compound used by mini owners for nearly every gasket except the cylinder head. Some late minis used a silicone jointing compound instead of gaskets on the differential, see GAC8000.

£8.25 exc vat

£9.90 inc vat

BREATHER HOSE FROM BREATHER TO CARB

12A1735

Emission hose from carb to breather valve, this hose has special size ends and made of a material to cope with taking these emission gases.

Approx 23.75" long with internal 5/16" end and 1/2" other end.

GHC406 jubilee c...

£5.65 exc vat

£6.78 inc vat

BIG END SET 10 OVERSIZE 1275 EXCEPT COOPER S

AEB91306-10

Big end shell bearings for the 1275 larger 1.75" diameter rod pin-not Cooper S

( Tri-Metal )

Sintered copper lead, lead plated,steel backed

Nominal Composition

Copper 74%

Lead 24%

Tin ...

£28.50 exc vat

£34.20 inc vat

BIG ENDS SET STANDARD 1275 EXCEPT COOPER S

AEB91306-00

Big end shell bearings for the 1275 larger 1.75" diameter rod pin-not Cooper S

( Tri-Metal )

Sintered copper lead, lead plated,steel backed

Nominal Composition

Copper 74%

Lead 24%

Tin ...

£28.50 exc vat

£34.20 inc vat

TIMING COVER OIL SEAL ALL PRE 1992

88G561

Genuine Mini Spares Original black timing cover oil seal for all A series until the introduction of a new type of lip seal introduced in 1991 mainly for injection engines, when they changed to LUF10006--albeit many owners fit this not kn...

£1.80 exc vat

£2.16 inc vat

BLOCK GASKET SET ALL 1300 EXCEPT S

AJM206MS

Mini Spares own Universal gasket set for solid wall blocks

For any manual block, includes gaskets for "A"Plus and pre A Plus timing covers, but is less tappet chest cover gaskets. Does not include clutch oil seal.

We now offer an en...

£10.71 exc vat

£12.85 inc vat

MAINS STANDARD 1275 A PLUS ONLY 3 SIDE TAG 3 CENTR...

AEM91886-00

Original equipment quality for factory built engines giving longer life expectancy on road cars under variable conditions of oil and use. These are the 1275cc mains as fitted to A Plus engines with the locating tab in the middle rather than to the ou...

£30.00 exc vat

£36.00 inc vat

FAN BELT COGGED 1980on EXCEPT TWIN POINT

GCB10825

For minis with latest A plus water pump pulley CAM6408 (4.75" wide) and an alternator. This belt is slightly shorter than GCB10838 so always keep a spare so you know which size belt fitted your car best. This seemed to be fi...

£3.50 exc vat

£4.20 inc vat

FLYWHEEL KEYWAY - PRE VERTO (MADE IN EN24T STEEL)

88G508

Made in EN24T for strength they have been made to fit the majority of flywheels that seemed to slightly differ from the mid 60s. Run a file down the raised keyway if tight. This flywheel locking plate is for pre verto diaphragm clutches. For Verto ty...

£8.63 exc vat

£10.36 inc vat

CRANK THRUST WASHER SET 1275 STANDARD

AEW2136

Set of standard thrust washers for 1275.

£11.25 exc vat

£13.50 inc vat

MAINS SET 10 OVERSIZE 1275 A PLUS ONLY 3 SIDE TAG ...

AEM91886-10

Original equipment quality for factory built engines giving longer life expectancy on road cars under variable conditions of oil and use. These are the 1275cc mains as fitted to A Plus engines with the locating tab in the middle rather than to the ou...

£30.00 exc vat

£36.00 inc vat