£2.40 exc vat
£2.88 inc vat
In stock
This is the L/H blanking plug in the base of the factory type fitted plastic door mirrors JPC9848/9MS, where the adjustment is made and screw fixing holes to door are located.
£2.40 exc vat
£2.88 inc vat
In stockRecommended usage 1 x EAM4159 to fit one mini.
Upper door moulding rivet for Cooper S door trim. For Mk1 usually 1 at front and 3 at back making 4 per side and on Mk2 there were 2 per end at bottom making 4 per side. This is the 10mm head rivet and not required on our own 14A9773/9774 trims that ...
High quality non genuine door check strap for MK3 cars with wind up window doors (use with retaining pin CLZ412). Beware there are cheap copies on the market that are poor quality and when fitted to our cars did not function correctly!
Genuine Mini Spares Mk3 window drop frame in stainless steel. Supplied with the rubber seal.
The gasket that sits behind the door stiker on all wind up window type minis
on the B post.
MK3 Door & boot handle fitting kit, including original type screws, star washers and gaskets.
Complete fitting kit for the door check straps on all Minis fitted with external hinges.
Angled spacer washer for Mk1/2 external door hinge cars for the upper hinge
Reinforced elastomer liner for door trim made from VELVEX to prolong the life of your door cards.Die cut on press tools that make the original door cards. Each hole for door locks, window winders, door handles, speaker holes are precision cut to fit ...
Gasket for the chrome base CZH3521 to door as fitted to factory production cars from 1970 -80.
The fixing holes to door are 2.1/8"(55mm)centres apart where as late cars are only 3/4" apart.
MK3 door hinge fitting kit for all internal hinged doors. (hinges not included)
Black door pocket liner for the L/H door which has sliding windows and external hinges
Curley fibre glass Mini Miglia wheel arches, approximately 4.8." wide, with front edge 6.9" at widest point. Requires MS127FK brackets. Probably the largest wheel arches used on minis. Please note these are white gel coat not black and w...
Group 2 fibre glass wheel arches in premium black finish not requiring paint, judged the best on the market available by our customers, they stick out 1.75" including lip, when bodylines (wheel arch and moulding lip) are kept original. Screws are vis...
Original shape washer jet for Mk1/2 minis. Made to the same specification as the last type made for rover parts sales with a nut on a loose thread so it can be tightened easily by hand in the engine bay without any modifications. Should be used with ...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.