£4.48 exc vat
£5.38 inc vat
In stock
£4.48 exc vat
£5.38 inc vat
In stockRecommended usage 1 x GAC8001 to fit one mini.
Minis leak oil-- full stop ,so when changing gaskets except for the cylinder head apply always apply hylomar or this RTV sealant which is great for sticking the gasket to the rocker cover and letting it dry before installation. Used by Rover on the d...
We all knows Mini's like to leak a little oil... This drip tray is great for protecting your garage floor, low profile and measures 60x40cm.
Perfect for using whilst rebuilding heads, engines and gearboxes to keep all the small pa...
Metric & Imperial offset feeler gauge set, ideal for setting tappet clearnace, primary gear end float etc. Offset for ease of use.
Imperial: .005/.006/.007/.008/.009/.010/.011/.012/.013/.014/.015/.016/.017/.018/.019/.020/...
Imperial & Metric spanner set ideal for completing most tasks on your classic Mini, these are mirror polished spanners.
Contents: Bi Hex x Metric combination spanners 6, 7, 8, 9, 10, 11, 12, 13, 14, 17, 19mm and Stubby 10, 11, 12, ...
3/8" 6 point deep AF/Imperial Socket set
Sizes 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16"
3/8" 6 point shallow AF/Imperial Socket set
Sizes 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16"
This tool bolts where the starter motor fits to lock the flywheel in place when trying to remove the flywheel bolt/crank pulley etc.
Copper Grease/Anti-Seize high melting point assembly grease supplied in 500g tub, suitable for jobs such as lubricating bolt threads, essential for any restoration project!
CV fitting tool, designed to assist with the correct fitting of CV joints, wheel bearings or drive flanges, as specified in the Haynes workshop manual. The wheel bearing should be torqued to the specified setting using this washer, and then removed a...
Molybdenum Grease supplied in a 500g tub, suitable for the lubrication of CV joints and any other homokinetic joints.
ESPECIALLY FOR MINIS
This 20-50w semi synthetic oil is produced especially for minis where it needs to lubricate both engine and gearbox parts giving the neccessary coating and protection. Semi synthetic has a long life to 100c with maximum ...
Universal ball joint seperator - different design and well priced.
Two part primary gear oil seal tool (known as clutch seal tool). It includes the sleeve that slides over the primary gear to protect the seal membrane on the gear splines, plus the outer body that pushes the seal home square. This is achieved by usin...
Don't try to remove the flywheel on a Mini without one of these special pullers. The tappered seat must by design be extremely tight and this special puller leverages in the correct place to make removal possible. And since you can not change the cl...
Inboard CV (pot joint) splitting tool used to remove the constant velocity joint from the gearbox by way of driving this wedge-like tool between joint and gearbox. Does not remove joint from driveshaft.
Swivel pins have a taper that sits in the lower and upper arms and this tool is for splitting the swivel pins from the lower and upper arm.
Minis leak oil-- full stop ,so when changing gaskets except for the cylinder head apply always apply hylomar or this RTV sealant which is great for sticking the gasket to the rocker cover and letting it dry before installation. Used by Rover on the d...
this is called agrinding stick because it is used for sticking on the cylinder head inlet and exhaust valve heads to lap them in with grinding paste on heads without lead free inserts--valves usually do not need grinding in when new and fitted to new...
Crank pulley and camshaft nut socket also CV joint nut pre metric thread and subframe single tower mounting bolt on post 76 cars. Also fits pre 1997 steering wheel nut. 1/2" Drive.
All minis need regular greasing on the swivel hubs and rear radius arms in particular so this is the grease gun to help with these jobs.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.