GRINDING STICK
MSA1004

£2.26 exc vat

£2.71 inc vat

In stockIn stock
this is called agrinding stick because it is used for sticking on the cylinder head inlet and exhaust valve heads to lap them in with grinding paste on heads without lead free inserts--valves usually do not need grinding in when new and fitted to new...

£2.26 exc vat

£2.71 inc vat

In stockIn stock

Recommended usage 1 x MSA1004 to fit one mini.

Recommended products
VALVE GRINDING PASTE (LARGE)
MSA1005

£3.90 exc vat

£4.68 inc vat
People also bought products
TORQUE CONVERTER PULLER AUTO
18G1086

Torque converter puller tool for automatics, made in the UK.

£55.43 exc vat

£66.52 inc vat
IMPERIAL/METRIC OFFSET FEELER GAUGE SET
TOOL30

Metric & Imperial offset feeler gauge set, ideal for setting tappet clearnace, primary gear end float etc. Offset for ease of use.





Imperial: .005/.006/.007/.008/.009/.010/.011/.012/.013/.014/.015/.016/.017/.018/.019/.020/...

£9.41 exc vat

£11.29 inc vat
AF/IMPERIAL & METRIC COMBINATION SPANNER SET 32PC
TOOL31

Imperial & Metric spanner set ideal for completing most tasks on your classic Mini, these are mirror polished spanners.



Contents: Bi Hex x Metric combination spanners 6, 7, 8, 9, 10, 11, 12, 13, 14, 17, 19mm and Stubby 10, 11, 12, ...

£41.34 exc vat

£49.61 inc vat
3/8" AF IMPERIAL DEEP SOCKET SET 8PC
TOOL29

3/8" 6 point deep AF/Imperial Socket set



Sizes 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16"

£16.83 exc vat

£20.20 inc vat
3/8" AF IMPERIAL SHALLOW SOCKET SET 8PC
TOOL28

3/8" 6 point shallow AF/Imperial Socket set



Sizes 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16"

£12.38 exc vat

£14.86 inc vat
1/4" AF IMPERIAL DEEP SOCKET SET 9PC
TOOL27

1/4" 6 point deep AF/Imperial Socket set



Sizes 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2" AF

£12.08 exc vat

£14.50 inc vat
1/4" AF IMPERIAL SHALLOW SOCKET SET 9PC
TOOL26

1/4" 6 point Shallow AF/Imperial Socket set



Sizes 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2" AF

£9.41 exc vat

£11.29 inc vat
FLYWHEEL LOCKING TOOL
TOOL25

This tool bolts where the starter motor fits to lock the flywheel in place when trying to remove the flywheel bolt/crank pulley etc.

£19.50 exc vat

£23.40 inc vat
RED RUBBER GREASE 500g
DEP74500

Red Rubber Grease has been specifically designed for use in environments where compatibility with seals and/or resistance to Hydrocarbons is required. Red Rubber Grease is compatible with both natural rubber and synthetic seals. The formulation of th...

£13.50 exc vat

£16.20 inc vat
CASTROL CLASSIC OIL PUMP CAN
J106

Classic Castrol oil can with flexible spout and thumb pump.

£9.69 exc vat

£11.63 inc vat
CARTRIDGE GUN
GAC8001

Cartridge gun for most silicone sealants including our RTV (GAC8000).

£4.48 exc vat

£5.38 inc vat
1/2" HEX KEY SOCKET FOR CRANK BOLT
TOOL22

1/2" hex key socket needed when using our upgraded crank pulley bolt C-AHT147, 1/2" drive.

£3.00 exc vat

£3.60 inc vat
COPPER GREASE high melting point 500g
DEP73500

Copper Grease/Anti-Seize high melting point assembly grease supplied in 500g tub, suitable for jobs such as lubricating bolt threads, essential for any restoration project!

£13.13 exc vat

£15.76 inc vat
SPECIAL WASHER FOR SEATING CV AND WHEEL BEARINGS S...
TOOL21

CV fitting tool, designed to assist with the correct fitting of CV joints, wheel bearings or drive flanges, as specified in the Haynes workshop manual. The wheel bearing should be torqued to the specified setting using this washer, and then removed a...

£4.50 exc vat

£5.40 inc vat
A SERIES CRANKSHAFT TAP 5/8" X 16 TPI WHITWORTH TH...
TOOL20

A series crankshaft tap in 5/8 x 16 tpi Whitworth form, used for both ends of the crankshaft.

£30.00 exc vat

£36.00 inc vat
SPARK PLUG SOCKET 21MM
TOOL18

Sykes Pickavent 21mm spark plug socket, 3/8" Drive

£3.60 exc vat

£4.32 inc vat
GEARBOX SELECTOR ROLL PIN PUNCH TOOL
TOOL17

Roll pin punch for removing RPS1416 roll pin from the gear selector mechanism.

£2.50 exc vat

£3.00 inc vat
JACK BAG MADE IN FELT BACKED PVC
CK721

This bag is made out of "Hardura" which is a heavy PVC with a felt backing laminated to it. When sewn up it will hold the Jack & lever and is all held with the tie Straps. Because the bag is made of heavy material it will not wear through unlike plas...

£43.55 exc vat

£52.26 inc vat
MOLY GREASE (SUITABLE FOR CV JOINTS) 500g
DEP72500

Molybdenum Grease supplied in a 500g tub, suitable for the lubrication of CV joints and any other homokinetic joints.

£6.30 exc vat

£7.56 inc vat
MULTI PURPOSE GREASE DX LM2 500G
DEP71500

Multi-Purpose LM2 Grease supplied in a 500G tub.

This grease is suitable for Wheel Bearings, Radius Arms, Upper arms, knuckle joint cups and other regular greasing points.

£5.57 exc vat

£6.68 inc vat