BONNET PROP SPRING TYPE

MSSK018

£10.40 exc vat

£12.48 inc vat

In stock

bolts to an existing hinge and is spring loaded to act as an auxiliary bonnet prop

£10.40 exc vat

£12.48 inc vat

In stock

Recommended usage 1 x MSSK018 to fit one mini.

People also bought products

BONNET AND BULKHEAD INSULATION PAD MK3 ON (PVC COA...

CK975A

Tough PVC sound proofing for the Bonnet and Bulkhead for all 1970 onwards mini's. Supplied with heat resistant glue for the bonnet pad

£55.50 exc vat

£66.60 inc vat

INTERNAL BONNET RELEASE CONVERSION

GS130273

The safest way to have a bonnet lock is an internal release type, as fitted to all the late Minis FROM 1992/3 on. The kit includes a new catch with bolts, correct length cable and bracket to fit at the end of the parcel shelf. Not suitable for clubma...

£19.20 exc vat

£23.04 inc vat

PLASTIC CLIP FOR BONNET PROP AND SUNVISORS ON 64/6...

GFK7344

Plastic clip for sunvisor 1964-5 and some bonnet props on early cars,was GHF1120 and ADA4370. the side clip on these models was ADA4484.

this set up was used with first plastic mirrrors and black rubber...

£1.94 exc vat

£2.33 inc vat

BONNET PROP RUBBER

2H9215

Black rubber bung to hold the bonnet prop in place on MK1/2 minis.

Also the same profile and shape as the rear boot board buffers but nearly twice the length at 1.5"(38.3mm).

£2.60 exc vat

£3.12 inc vat

QUICK RELEASE BONNET HINGE PR MK3 ONWARDS

MSSK019

Quick Release Bonnet Hinges , MK3.one pair

Available for MK3 onwards Minis only. The MK3 Mini has hinges mounted differently from earlier models, these allow the bonnet to be quickly lifted off the car. If you've ever banged your head or cri...

£41.23 exc vat

£49.48 inc vat

BONNET FRONT DRAIN SEAL

JRC7898

This is the seal that goes on the front of the bonnet to stop rain getting at

your electrics or causing rust and was fitted to every mini and Clubman.

£6.75 exc vat

£8.10 inc vat

BONNET PROP ROD

BKD360030

Bent or missing bonnet prop? For the Clubman models you will have to straighten it by hand as the original is obsolete. Correct to latest shape fitted on mini saloons--only one in current production, Fits all. Replace it---Dont forget it and buy a ne...

£8.50 exc vat

£10.20 inc vat

BONNET SAFETY CATCH HOOK-ALL MINIS

14A366

This is the hook part with a spring and spacer only. This fits all Minis and Clubmans as the bracket it attaches to is on all bonnets unless broken. The spring loaded catch is designed to keep the bonnet from blowing open while driving should the lat...

£16.50 exc vat

£19.80 inc vat

BONNET RUBBER BUFFER 1990 ON SELF ADHESIVE

ADU2072

Around 1990 they moved the bonnet buffers from the hole fittings on the slam panel to the sides of the bonnet opening. Common sense says these will work on any year Mini. THESE ARE STICK ON TYPES and useful for sticking anywhere on the bonnet landing...

£0.85 exc vat

£1.02 inc vat

CLUBMAN BONNET BUFFER

AAU5486A

BONNET BUFFER, 1500.

£1.47 exc vat

£1.76 inc vat

BONNET STRAP TAN ORIGINAL WORKS TYPE-SINGLE STRAP

C-AJJ3381

This very heavy duty bonnet strap is a excellent reproduction of the original factory Special Tuning department special. Original light colour Tan leather

3.3mm thick from the tanneries for use on horse bridles, with alloy fastening. Screws ...

£12.05 exc vat

£14.46 inc vat

BONNET REAR DRAIN SEAL

JRC7008

This seal actually fits on the scuttle lip and was always included in the ignition electrics protection kits. Found on all years of cars but fitted as standard in the 80s for a while.

£14.95 exc vat

£17.94 inc vat

BONNET REAR GUTTER SEAL 1991 ON SELF ADHESIVE

CJE10021

From 1990 on this seal was fitted instead of 14A9010MS or JRC7008, being thinner than the previous seal it was made self adhesive and stuck to the underneath of the bonnet on the rear lip. Many cars have it fitted in the scuttle panel in...

£2.95 exc vat

£3.54 inc vat

BONNET LOCK LATCH ASSEMBLY

FPS100340

All twin point injected minis were fitted with an in-cabin cable release for the bonnet lock and this later type had a plastic insert for the bonnet pin to travel through. This is part of a complete kit we have for any minis, see GS130273

£37.80 exc vat

£45.36 inc vat

BONNET HINGE L/H