£8.50 exc vat
£10.20 inc vat
In stock
£8.50 exc vat
£10.20 inc vat
In stockRecommended usage 1 x XFJ10026WHITE to fit one mini.
If you have rear lamps with integrated reverse lights this gasket fits between the lens and the lamp body unless you have the rare Altissimo lamps fitted in
Europe from about 1974 to early 80s.
This is the indicator orange coloured bulb you require when the lens is plain
or white coloured. The pins on these are opposite each other whereas the twin point lamps have offset pins GLB344 and appear at a 2 o'clock angle whe...
This is a red coloured stop and tail bulb for use in the rear white lens kit so often used on minis from 1976 on.Sold individually
THE LENS FIXING SCREWS FOR THE REAR LENS ON MK4 1976 ON WITH REVERSE LENS ARE ALL THE SAME. SOLD INDIVIDUALLY. ALSO FITS TWIN POINT FRONT INDICATOR LAMP.
3 per lamp required or 6 per car set.
Lucas clear upper lens for cars with reverse lamp built in rear lamp
with correct bulbs for the fashionable clear rear lens look. If you want to replace the lower clear lens with the red reflector because they are faded or damaged use kit MS...
Kit includes 2 original rear lower lens in white with reflectors plus 2 upper lens in white for the modern day look. Included are the 4 bulbs required to make the kit legal.
The lens seals are available individually as XFH100460...
Lucas upper lens plus gaskets for cars with built in reverse facilty in lamp
These are the upper lens in clear plastic with 2 new lens gaskets to stop water seeping into the lamps, plus the correct bulbs when you require the fashionable clea...
Genuine Mini Spares R/H genuine lamp with white lens. This type of lamp was fitted from 1976 on as standard equipment with a built in reverse lamp. Supplied with gaskets and correct coloured bulbs this has the more fashionable/retro white upper lens...
Stainless steel screw kit for all mk2/3 lens to lamp body. Comes as a car set with six screws and six fibre washers.
Lucas upper lens plus gaskets for cars with built in reverse facilty in lamp
These are the upper lens in clear plastic with 2 new lens gaskets to stop water seeping into the lamps, plus the correct bulbs when you require the fashionable clea...
Kit includes 2 original rear lower lens in white with reflectors plus 2 upper lens in white for the modern day look. Included are the 4 bulbs required to make the kit legal.
The lens seals are available individually as XFH100460...
Lucas clear upper lens for cars with reverse lamp built in rear lamp
with correct bulbs for the fashionable clear rear lens look. If you want to replace the lower clear lens with the red reflector because they are faded or damaged use kit MS...
Genuine L/H lamp.Beware of cheaper inferior lamps for sale.
Fitted from 1976 on as standard equipment this was the Lucas style lamp with the built in reverse lamp.Supplied with gaskets. Many people now change the upper lens to the more fash...
Convert your upper lens to all white but dont forget to use correct colour bulbs
for all lamps that have a built in reverse lamp.
Genuine R/H lamp. Beware of cheaper inferior lamps for sale.Fitted from 1976 on as standard equipment this was the Lucas style lamp with the built in reverse lamp. Supplied with gaskets. Many people now change the upper lens to the more fashionable w...
For MK2/3 lamps without built in reverse lights these are the rubber seals between the lamp base and the car body, this is left hand.
Two of these plastic lens that hold festoon bulbs (GLB239) are mounted in the metal cast number plate housing (13H6900) on all MK3 bootlids from 1970on. Sold individually with bulb LESS FIXING SCREWS.
See PMZ206 for screw replac...
This bracket is required to re-locate standard fitment fog lamps on R/H/D cars when fitting corner bars and overiders to the rear bumper.
Fitted to cars with the reverse lens built into the rear lamp which became standard in 1976, this is the Right hand seal between the lamp and the car body.
Fitted to cars with the reverse lens built into the rear lamp which became standard in 1976, this is the L/H seal between the lamp and the car body.
For MK2/3 lamps without built in reverse lights these are the rubber seals between the lamp base and the car body, this is right hand. The seal between lens and lamp is 37H6778.
If you have rear lamps with integrated reverse lights this gasket fits between the lens and the lamp body unless you have the rare Altissimo lamps fitted in
Europe from about 1974 to early 80s.
Upper amber and red (indicator and stop) lens left hand for Lucas rear lamps with a built in reverse lamp. Will not fit altissimo which had a one pice complete lens, see AAU4946/7.
You can scrub all you want on those old plastic tail light lens and they will never look as good as new ones. If yours is cracked or beaten then it should be a no brainer, replace them and look sharp.
Owing to their position on the car and chrome on metal these must be cleaned weekly. They are a direct replacement for MK3 on original number plate lamps and are less the 2 light lens, which are the same fitting for this lamp. These lamps use M4 scre...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.