Mk1 REAR SCREEN RUBBER SEAL
14A8744

($11.50) £11.50 exc vat

($13.80) £13.80 inc vat

In stockIn stock
Rear screen seal for mk1 cars which had the smaller rear window 1959-1967.

($11.50) £11.50 exc vat

($13.80) £13.80 inc vat

In stockIn stock

Recommended usage 1 x 14A8744 to fit one mini.

Recommended products

The plastic chrome insert for fitting in the windscreen and backlight rubbers of all minis. You will require TOOL02 to fit these.

Finishing clip in brightwork (chrome colour)for 24A1466MS locking strip in windscreen and backlight rubbers.

Most minis have a chrome coloured plastic insert in the windscreen rubber but

some owners in hot countries prefer this black one, which some claim is less prone to shrink or go off colour.

This tool is for fitting the cosmetic chrome or black plastic insert in the middle of the windscreen surround rubber.

Heavy duty windscreen tool for fitting the chrome insert on windscreen rubbers. Ideal for people who use the tools more often.

Alternative products

Genuine Mini Spares quality product. For Mk1 cars use 14A8744

For Pickups you will need to cut and shorten either seal and make sure the join is at the bottom. The extrusion is the correct shape.

This seal is the best ...

People also bought products

Mini Spares own MK3 Window drop rail kit includes 1 x ALA5745 KIT with the 2 rails which are different front an rear (ALA5746 and 5747) plus 2 x 24A948 seals for the drop rails to hold the glass, this kit will do one complet...

The black windsreen and backlight rubber fillet. Chrome is more popular however.

A single length for a single screen is 37H8052

Front and rear screen with chrome plastic insert.Saving nearly 15% on cost of individual partts

This flat rubber seal can be use for opening rear 1/4 windows or radiator to inner wing. Supplied in 2 metre lengths. 38mm wide.



can also be used on the petrol tank straps and plinths

Genuine Mini Spares mouldings product as supplied to Rover.

These are the later door mouldings that prevent water running down the windows into the door causing rust and have the black platic ends fitted for later car safety regulations but ...

Sliding window type weatherstrip kit R/H

kit contains lower and upper sliding channels plus the vertical strip that attaches to the glass as a draught excluder plus the stainless steel window catch runner that the lower channel sits in,with ...

Genuine MK3 wind-up window upper slide up and down felt lined channel that fits into the R/H upper door frame. Left (PAM3077) and right (PAM3076) look identical but are mirror images.

Genuine MK3 wind-up window upper slide up and down felt lined channel that fits into the upper door frame. Left (PAM3077) and right (PAM3076) look identical but are mirror images.If you are looking for a cheaper budget version see PAM3077MS

...

pair of outer door seal mouldings and fixing clips

These are the original type without the black plastic ends which were introduced on later models for safety criteria. All outside moudings are interchangable but are sided.

Genuine Mini Spares mouldings product as supplied to Rover.

Pair of the later door outer mouldings plus ADH3809 clips to help prevent water running down the windows causing rust.

These have black plastic ends for car s...

All mini windscreen and backlights have this plastic moulding in the middle 99% of the time. Chrome in colour, this is on a 30metre roll for trade use.

PW5013 is the black equivalent.

Rubber seal for all mini windshields. Uses locking strip 24A1466(chrome) or 37H8052(black.) REMEMBER YOU MUST FIT THE RUBBER TO THE BODY FIRST. DO NOT USE THE STRING METHOD BECAUSE IT STRETCHES AND TEARS THE RUBBER.

There is a later wider r...

Most minis have a chrome coloured plastic insert in the windscreen rubber but

some owners in hot countries prefer this black one, which some claim is less prone to shrink or go off colour.

Fitted from late 1992 and on all MPI cars 1996 on it has an extra lip to give a neater seal line to help quieten down windscreen/panel vibration noise on the "drive by" homologation tests.

Also designed to help stop windscreens from leaking ...

Finishing clip in brightwork (chrome colour)for 24A1466MS locking strip in windscreen and backlight rubbers.

The MK1/MK2 Mini not only has a smaller rear side quarter window than the MK3 but also the rubber seal is cosmetically different. The only seal available for years was the MK3 which has a grain texture on the inside edge. Now in stock are very good r...

Draft excluder for sliding window doors as fitted to Mk1/2 Minis. Right hand side. Properly cut angles as original.Either crimp both ends with your fingers to make it stay on door glass or use a glue as per the factory on later vans.

Qty one...

Genuine Mini Spares quality product. For Mk1 cars use 14A8744

For Pickups you will need to cut and shorten either seal and make sure the join is at the bottom. The extrusion is the correct shape.

This seal is the best ...

Genuine Mini Spares mouldings product as supplied to Rover.

For wind up window cars 1970 on this is a set of inner and outer door brightwork mouldings with rubber seals attached to stop water running down the windows causing rust and to prev...

Sliding window type weatherstrip kit L/H.

Kit contains lower and upper sliding channels plus the vertical strip that attaches to the glass as a draught excluder plus the stainless steel window catch runner that the lower channel sits in,with...