DOOR HINGE R/H TOP MK3

R/H upper door hinge for MK3 on with internal door hinges and wind up window

also see kits MSSK017 and MSSK017B sets which are better value.

($33.02) £33.02 exc vat

($39.62) £39.62 inc vat

SCREW DOOR HINGE / STRIKER PLATE MK3 1969 ON

SF604061

Countersunk, crosshead screw. 1/4"unf 19mm (3/4") total length.

This screw fits the internal door hinges on wind up window cars and the striker plate on the B post.

($0.32) £0.32 exc vat

($0.38) £0.38 inc vat

DOOR HINGE LOWER MK3 LH&RH

CZH212

Also se kits MSSK017 and MSSK017B

Genuine lower hinge--note, the 2 studs actually thread into the genuine hinge so can be replaced if damaged or broken

($33.81) £33.81 exc vat

($40.57) £40.57 inc vat

DOOR HINGE METAL SUPPORT PLATE 2.2mm thick

ALA6381

These shims are what the factory used to fit on the other side of the hinge panel as a stiffener and sometimes even to align the doors themselves, 2.2mm thick.

($2.05) £2.05 exc vat

($2.46) £2.46 inc vat

NUT PLAIN 1/4" UNF

GFK3211

($0.07) £0.07 exc vat

($0.08) £0.08 inc vat

SCREW FOR DOOR LOCK MK3 SPECIAL CUTTING THREAD

ZCT410

Special thread cutting screw 1/4 UNF 1.25" (31mm) long.

Screw to hold the lock assembly on the door of MK3 cars with internal hinges and wind up windows. On new doors or for easy fitment use these special screws with cutting thread (3 sided ...

($0.92) £0.92 exc vat

($1.10) £1.10 inc vat

DOOR ASSEMBLY BARE LESS HINGES RH CRASH BAR TYPE

BDA360100

All the last minis from 1996 were fitted with this safety bar behind the door skin. The door framework only is avaiable as MSP020.

The original doors less hinges and protecting safety bar is still available as BMP306MS<...

($490.00) £490.00 exc vat

($588.00) £588.00 inc vat

GENUINE MK3 MINI DOOR ASSEMBLY LESS DOOR SKIN RH

MSP020

Mk3 Mini onwards door frame assembly without the door skin R/H.

Supplied unpainted ready for door skin fitment.

($238.50) £238.50 exc vat

($286.20) £286.20 inc vat

MK3 MINI DOOR PLASTIC MEMBRANE (PR)

DL3030

Reinforced elastomer liner for door trim made from VELVEX to prolong the life of your door cards.Die cut on press tools that make the original door cards. Each hole for door locks, window winders, door handles, speaker holes are precision cut to fit ...

($12.23) £12.23 exc vat

($14.68) £14.68 inc vat

DOOR SKIN ONLY L/H MK3. NON GEN

MS11L

This is a Non genuine L/H outer MK3 door skin.

It does not fit as well as the genuine CZH3301 but a good inexpensive replacement less mirror holes.

($49.65) £49.65 exc vat

($59.58) £59.58 inc vat

DOOR MK1 L/H SLIDING WINDOW TYPE

14A8307

The MKI Mini door is distinctive with its external door hinges and inside pocket and sliding windows. The single biggest problem with the doors is the tendency to rust particularly along the bottom edge. Make sure you replace the drain pipe rubber h...

($575.00) £575.00 exc vat

($690.00) £690.00 inc vat

DOOR ASSEMBLY BARE LESS HINGES LH PRE CRASHBAR TYP...

BMP307MS

Genuine L/H door without crash bar which only later cars had fitted. This door also has no hinges.This door also has no hinges. L/H door framework is available as MSP021.The later type door with the crash safety bar fitted internally are...

($490.00) £490.00 exc vat

($588.00) £588.00 inc vat

DOOR MK1 R/H SLIDING WINDOW TYPE

14A8306

The MKI Mini door is distinctive with its external door hinges and inside pocket and sliding windows. The single biggest problem with the doors is the tendency to rust particularly along the bottom edge. Make sure you fit new drainage hoses [link]14...

($575.00) £575.00 exc vat

($690.00) £690.00 inc vat

DOOR SKIN MK3 L/H wind up window type doors

CZH3301

The genuine outer skin only for L/H doors with wind up windows without door mirror lug nuts but holes for fitting ADU2038 nutserts. A doorframe is also available as MSP021.

($95.00) £95.00 exc vat

($114.00) £114.00 inc vat

DOOR MOULDING OUTER WITH SEAL L/H

PAM1015

Genuine Mini Spares mouldings product as supplied to Rover parts division.

L/H outer brightwork trim with the seal attached to stop water seeping down into the door frame, on all cars with wind up windows from about 1980 on, these are the la...

($15.45) £15.45 exc vat

($18.54) £18.54 inc vat

DOOR REAR L/H VAN/ESTATE

14A8097

left hand rear door for clubman/mini/estates and vans from genuine tooling.

see also rear window seal 14A7210.

the rear door window glass are obsolete but we have a few left on clearance

2006-see 14A7181 for c...

($300.00) £300.00 exc vat

($360.00) £360.00 inc vat

DOOR REAR R/H VAN/ESTATE

14A8096

Right hand rear door for the clubman and mini estate as well as the van. These are from original tooling. The seal for the window is 14A7210 and if you want to grab the last of the rear window glass at sale prices see 14A7181

($300.00) £300.00 exc vat

($360.00) £360.00 inc vat

DOOR SKIN MK3 RH wind up window type doors

CZH3300

The genuine outer skin only for the R/H door of wind up window cars only. Without door mirror lug nuts (nutserts) but holes for the nutserts ADU2038. A door frame is also available as MSP020

($95.00) £95.00 exc vat

($114.00) £114.00 inc vat

MK3 DOOR HANDLE & BOOT FITTING AND GASKET KIT

CZH1785FK

MK3 Door & boot handle fitting kit, including original type screws, star washers and gaskets.

($4.74) £4.74 exc vat

($5.69) £5.69 inc vat

MK 1/2 EXTERNAL HINGE ANGLED SPACER

14A7387

Angled spacer washer for Mk1/2 external door hinge cars for the upper hinge

($0.90) £0.90 exc vat

($1.08) £1.08 inc vat

DOOR HINGE SHIM 0.7mm THICK STAINLESS STEEL

ALA6383

Door hinge shim for all wind up window cars, these are used to align the doors, 0.7mm thick and made in stainless steel, use with ALA6382 to get good door alignment. See ALA6381 for thicker rear support plate.

($1.76) £1.76 exc vat

($2.11) £2.11 inc vat

DOOR HINGE FITTING KIT COMPLETE MK3 ON

MSSK017FK

MK3 door hinge fitting kit for all internal hinged doors. (hinges not included)

($18.09) £18.09 exc vat

($21.71) £21.71 inc vat

MK3 DOOR HINGE SHIM 1.2mm THICK STAINLESS STEEL

ALA6382

Door hinge shim for all wind up window cars, these are used to align the doors, 1.2mm thick and made in stainless steel use, with ALA6383 to get good door alignment See ALA6381 for thicker rear support plate.

($1.76) £1.76 exc vat

($2.11) £2.11 inc vat

BARREL LOCK RETAINING CLIP (and fixing for 24A71 b...

PFR109

Clip for Door Handle required when changing barrel set. Heavy duty round spire clip specially made for the job.

($0.27) £0.27 exc vat

($0.32) £0.32 inc vat

SCREW FOR DOOR LOCK MK3 SPECIAL CUTTING THREAD

ZCT410

Special thread cutting screw 1/4 UNF 1.25" (31mm) long.

Screw to hold the lock assembly on the door of MK3 cars with internal hinges and wind up windows. On new doors or for easy fitment use these special screws with cutting thread (3 sided ...

($0.92) £0.92 exc vat

($1.10) £1.10 inc vat

DOOR GLASS WINDOW RAIL SUPPORT KIT WITH RUBBERS

MSSK2105

Mini Spares own MK3 Window drop rail kit includes 1 x ALA5745 KIT with the 2 rails which are different front an rear (ALA5746 and 5747) plus 2 x 24A948 seals for the drop rails to hold the glass, this kit will do one complet...

($23.99) £23.99 exc vat

($28.79) £28.79 inc vat

MIRROR R/H PLASTIC IN BLACK 1980 ON

JPC9848MS

GENUINE MINI SPARES PRODUCT supplied with a slightly different plastic base cover-see EAM4159.

This is the only mirror available since Rover stopped supplies.

The best way to drive a Mini is very defensively and knowing...

($19.20) £19.20 exc vat

($23.04) £23.04 inc vat

WINDOW DROP GLASS RUBBER SEAL TO REGULATOR FRAME

24A948

The rubber that sits in the frame to hold the windows on wind up window type doors. The frames are ALA5746/7 or see MSSK2105 also used on Clubman Estate and Traveller rear windows in the finger pull grips.

Sold individually.2 pe...

($2.60) £2.60 exc vat

($3.12) £3.12 inc vat