HINGE REPAIR KIT FOR VAN REAR DOORS PER HINGE
KMM170

($6.80) £6.80 exc vat

($8.16) £8.16 inc vat

In stockIn stock
A new pin, ball and spring for repairing the hinges on Minivan/Estate rear doors.

Kit for one hinge only --4 required per car

($6.80) £6.80 exc vat

($8.16) £8.16 inc vat

In stockIn stock

Recommended usage 1 x KMM170 to fit one mini.
Rear Doors and Tailgate - Qty 1

People also bought products
DOOR CHECK STRAP MK III ONWARDS NON GENUINE
ADA5671MS

High quality non genuine door check strap for MK3 cars with wind up window doors (use with retaining pin CLZ412). Beware there are cheap copies on the market that are poor quality and when fitted to our cars did not function correctly!

($7.50) £7.50 exc vat

($9.00) £9.00 inc vat
SQUARE DOOR STRIKER GASKET
FRG10002

The gasket that sits behind the door stiker on all wind up window type minis

on the B post.

($1.00) £1.00 exc vat

($1.20) £1.20 inc vat
MK1/2 DOOR CHECK STRAP FITTING KIT
ALE1221FK

Complete fitting kit for the door check straps on all Minis fitted with external hinges.

($29.52) £29.52 exc vat

($35.42) £35.42 inc vat
MK 1/2 EXTERNAL HINGE ANGLED SPACER
14A7387

Angled spacer washer for Mk1/2 external door hinge cars for the upper hinge

($0.90) £0.90 exc vat

($1.08) £1.08 inc vat
DOOR STRIKER PLATES STAINLESS STEEL PAIR
CZG5254SS

Stainless steel version of CZG5254 door striker plate. These used to be sided on earlier models but now fit either side. CZH627 striker plate lock with a loop fits into this. Supplied in pairs with stainless steel fixing scr...

($11.63) £11.63 exc vat

($13.96) £13.96 inc vat
DOOR HINGE SHIM 0.7mm THICK STAINLESS STEEL
ALA6383

Door hinge shim for all wind up window cars, these are used to align the doors, 0.7mm thick and made in stainless steel, use with ALA6382 to get good door alignment. See ALA6381 for thicker rear support plate.

($1.76) £1.76 exc vat

($2.11) £2.11 inc vat
MK3 DOOR HINGE SHIM 1.2mm THICK STAINLESS STEEL
ALA6382

Door hinge shim for all wind up window cars, these are used to align the doors, 1.2mm thick and made in stainless steel use, with ALA6383 to get good door alignment See ALA6381 for thicker rear support plate.

($1.76) £1.76 exc vat

($2.11) £2.11 inc vat
DOOR HANDLE KIT WITH BOOT HANDLE 1966 ON Mk1 & Mk2
24A2083KIT

Full Mk2 door handle set with 2 front door locking handles and boot handle with matching keys. Fitted from 1966 with the intoduction of the door safety escutcheon boss. This boss is available as 24A1834 and gasket 24A1835.

Regre...

($120.00) £120.00 exc vat

($144.00) £144.00 inc vat
VAN REAR HINGE GASKET
ALA8465

Van, Clubman Estate, Traveller and Countryman rear door hinge gasket. (sold individually)

($0.80) £0.80 exc vat

($0.96) £0.96 inc vat
WINDOW DROP GLASS RUBBER SEAL TO REGULATOR FRAME
24A948

The rubber that sits in the frame to hold the windows on wind up window type doors. The frames are ALA5746/7 or see MSSK2105 also used on Clubman Estate and Traveller rear windows in the finger pull grips.

Sold individually.2 pe...

($2.60) £2.60 exc vat

($3.12) £3.12 inc vat
DOOR MOULDING WEATHERSTRIP KIT INNER AND OUTER WIT...
MSSK2104

Genuine Mini Spares mouldings product as supplied to Rover.

These are the later door mouldings that prevent water running down the windows into the door causing rust and have the black platic ends fitted for later car safety regulations but ...

($56.28) £56.28 exc vat

($67.54) £67.54 inc vat
WEATHERSTRIP KIT MSSK020 PLUS 24A1303 R/H
MSSK022

Sliding window type weatherstrip kit R/H

kit contains lower and upper sliding channels plus the vertical strip that attaches to the glass as a draught excluder plus the stainless steel window catch runner that the lower channel sits in,with ...

($60.08) £60.08 exc vat

($72.10) £72.10 inc vat
DOOR MOULDING & POP RIVETS MK3 L/H
MS68

The Cooper S had these mouldings and this is the same item but made for the MK3 wind up window cars. These are easy to install, drill 1/8" holes evenly spaced on the straight edges,3 each side and 4 at the top(not on any corners)of the window frame.T...

($44.29) £44.29 exc vat

($53.15) £53.15 inc vat
CHECK ARM SEAL L/H 1986 ON
CGE10039

Sponge type seal on L/H A post of all minis with wind up window type doors to protect from water running down into body. A part you must keep your eye on to stop rust.

($3.50) £3.50 exc vat

($4.20) £4.20 inc vat
CHECK ARM SEAL R/H 1986 ON
CGE10038

Sponge type seal on R/H A post of all minis with wind up window type doors to protect from water running down into body. A part you must keep your eye on to stop rust, if the sponge is gettig hard then replace it.

($3.50) £3.50 exc vat

($4.20) £4.20 inc vat
CHECK ARM RUBBER GROMMET O/S 1970-1986
CZH4052

Moulded shape type right hand door stay grommet fitted until 1985 when it was replaced by a flat sponge type seal CGE10038/9.

($2.56) £2.56 exc vat

($3.07) £3.07 inc vat
DOOR WINDOW REGULATOR SCREW 1/4"
SE604031

Holds the window regulator to the door on wind up window minis from 1970 on.

Also holds fog lamp bracket to rear valance. 1/4" unf with 1/2" thread on

panhead type screw.

($0.42) £0.42 exc vat

($0.50) £0.50 inc vat
DOOR UPPER WINDOW GLASS SEAL R/H GENUINE MINISPARE...
PAM3076

Genuine MK3 wind-up window upper slide up and down felt lined channel that fits into the R/H upper door frame. Left (PAM3077) and right (PAM3076) look identical but are mirror images.

($12.54) £12.54 exc vat

($15.05) £15.05 inc vat
DOOR UPPER WINDOW GLASS SEAL L/H GENUINE MINISPARE...
PAM3077

Genuine MK3 wind-up window upper slide up and down felt lined channel that fits into the upper door frame. Left (PAM3077) and right (PAM3076) look identical but are mirror images.If you are looking for a cheaper budget version see PAM3077MS

...

($12.54) £12.54 exc vat

($15.05) £15.05 inc vat
DOOR MOULDINGS INNER PAIR OF EJU10003 PLUS CLIPS
MSSK2102

Genuine Mini Spares mouldings product as supplied to Rover.

These fit on the inside of the door as a draft excluder for the window, on all wind up window cars from 1970 on.

($25.44) £25.44 exc vat

($30.53) £30.53 inc vat