($142.50) £142.50 exc vat
($171.00) £171.00 inc vat
In stock
Max load 17amps. Should use 28 flash 03 wire.
Please note this is an non-standard upgrade to a period car. The buzz bar that carries the load can sometimes be...
($142.50) £142.50 exc vat
($171.00) £171.00 inc vat
In stockRecommended usage 1 x MS85A to fit one mini.
Finishing clip in brightwork (chrome colour)for 24A1466MS locking strip in windscreen and backlight rubbers.
Fitted from late 1992 and on all MPI cars 1996 on it has an extra lip to give a neater seal line to help quieten down windscreen/panel vibration noise on the "drive by" homologation tests.
Also designed to help stop windscreens from leaking ...
Most minis have a chrome coloured plastic insert in the windscreen rubber but
some owners in hot countries prefer this black one, which some claim is less prone to shrink or go off colour.
Rubber seal for all mini windshields. Uses locking strip 24A1466(chrome) or 37H8052(black.) REMEMBER YOU MUST FIT THE RUBBER TO THE BODY FIRST. DO NOT USE THE STRING METHOD BECAUSE IT STRETCHES AND TEARS THE RUBBER.
There is a later wider r...
This tool is for fitting the cosmetic chrome or black plastic insert in the middle of the windscreen surround rubber.
Heavy duty windscreen tool for fitting the chrome insert on windscreen rubbers. Ideal for people who use the tools more often.
Light green sundym glass for back screen with heated wires for all MK3 cars on.
Wonderfull way of keeping the rear window clear of mist inside and frost outside for safer driving.
IF A MAIL ORDER OR INTERNET ORDER IS PLACED FOR THIS...
Tinted version of MS86A-Modern day heated screen design.
Max load 17amps. Should use 28 flash 03 wire.
Please note this is an non-standard upgrade to a period car. The buzz bar that carries the load can sometimes...
Genuine MK3 wind-up window upper slide up and down felt lined channel that fits into the R/H upper door frame. Left (PAM3077) and right (PAM3076) look identical but are mirror images.
Genuine MK3 wind-up window upper slide up and down felt lined channel that fits into the upper door frame. Left (PAM3077) and right (PAM3076) look identical but are mirror images.If you are looking for a cheaper budget version see PAM3077MS
...
pair of outer door seal mouldings and fixing clips
These are the original type without the black plastic ends which were introduced on later models for safety criteria. All outside moudings are interchangable but are sided.
Genuine Mini Spares mouldings product as supplied to Rover.
Pair of the later door outer mouldings plus ADH3809 clips to help prevent water running down the windows causing rust.
These have black plastic ends for car s...
All mini windscreen and backlights have this plastic moulding in the middle 99% of the time. Chrome in colour, this is on a 30metre roll for trade use.
PW5013 is the black equivalent.
Rubber seal for all mini windshields. Uses locking strip 24A1466(chrome) or 37H8052(black.) REMEMBER YOU MUST FIT THE RUBBER TO THE BODY FIRST. DO NOT USE THE STRING METHOD BECAUSE IT STRETCHES AND TEARS THE RUBBER.
There is a later wider r...
Most minis have a chrome coloured plastic insert in the windscreen rubber but
some owners in hot countries prefer this black one, which some claim is less prone to shrink or go off colour.
Fitted from late 1992 and on all MPI cars 1996 on it has an extra lip to give a neater seal line to help quieten down windscreen/panel vibration noise on the "drive by" homologation tests.
Also designed to help stop windscreens from leaking ...
Finishing clip in brightwork (chrome colour)for 24A1466MS locking strip in windscreen and backlight rubbers.
Genuine Mini Spares quality product. For Mk1 cars use 14A8744
For Pickups you will need to cut and shorten either seal and make sure the join is at the bottom. The extrusion is the correct shape.
This seal is the best ...
The plastic chrome insert for fitting in the windscreen and backlight rubbers of all minis. You will require TOOL02 to fit these.
Genuine Mini Spares product.Quarter window seals for non-piano hinge type pop out rear side windows as fitted to Mk3.
Plenty of imported copies on the market but this is our true UK copy of the original as made by Standard Products for Rove...
The gasket that sits behind the door stiker on all wind up window type minis
on the B post.
Front subframe fitting kit for pre 76 twin bolt subframes, locktabs are included but not the subframe tower spacers as these rarely need changing.
Key barrel set for Mk3 onwards door handles and boot handles.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.