($51.00) £51.00 exc vat
($61.20) £61.20 inc vat
In stock
SEE also C-AJJ3329 for stainless steel.
These cannot be fitted with front overiders and the bottom moulding of the grille slat and back panel will need relieving upwards about 25mm and the width of the 2 outer brackets for fitment. Although the grille has to be modified the bar is now a straight bolt on part with our new 2014 re-design to fit current genuine and non genuine front panels. The centre bracket bolts to the middle bumper hole. They might entail some cutting of early original front panels and MK1 grille as per original works cars so please do not think this is a bolt on item.
Remove grille and bumper(then discard overiders if fitted).
Loosely fit centre bracket and lamp bar to middle bumper hole with lamp bar attached. Loosely fit outer brackets to lamp bar and line them up to front panel in the required position before drilling front panel.
The grille then needs cutting away at the bottom to slide down over the 2 outer brackets. On MK2/3 grilles the bottom finisher needs cutting away the width of the outer bar brackets and then upwards,usually to the first slat on 11 wide slat grille or about 25mm. Try not to cut all the way through the grille back panel as it supports the slats. The grille then slides down over the two outer brackets and the grille modifications are rarely noticed.
It is worth the effort if you want a rigid lamp bar that holds the beams of light true rather than vibrate like others on the market which cause light deflection
($51.00) £51.00 exc vat
($61.20) £61.20 inc vat
In stockRecommended usage 1 x MSA1101 to fit one mini.
Pair of Chrome WIPAC spotlights. 135mm in diameter, 60mm deep with covers. The lamp is nearly all forward of the mounting bracket making it great for fitting in front of mini grilles. Bulbs are H3 type 55 watts GLB453.
You should always use this kit for fitting any auxiliary spot or fog lamps.
Kit contains wiring and safety relay-cheaper than a burnt out engine compartment.
Please note, SPI and MPI cars have this facility built as standard safety ...
Yes, seeing where you are driving can be fun! Added lights look neat to the passerby, but more importantly they feel good while you are driving!
Our "Ring" brand driving or fog lamps are a popular choice, these are a 6" (156mm) diameter 63m...
Copy of the original heavy duty works lamp bar with all fittings but now in stainless steel for longevity.This type was used on LBL66D on the 1967 MONTE CARLO RALLY WITH THEIR NOW LEGAL LIGHTS Consists of a central support bracket and 2 end supports ...
Minispares design spotlight bracket fitted to cars where it mounts on the front panel valance and grille support panel giving it perfect rigidity so that the power of the lamp was not impaired. Requires a M8 metric nut. Many cheap aftermarket product...
Pair of high power Chrome Fog lights. 5.5"( 135mm )diameter, 50mm deep with durable plastic covers. Universal fitting. The lamp is nearly all forward of the mounting bracket making it great for fitting in front of mini grilles. Bulbs are H3 type 55 w...
Minispares design spotlight bracket fitted to cars where it mounts on the front panel valance and grille support panel giving it perfect rigidity so that the power of the lamp was not impaired. Requires a M8 metric nut. Many cheap aftermarket product...
Copies of the originals in vinyl
Incorperating the original small clear window to show if the lamp remains switched on.
Minispares design heavy duty STAINLESS STEEL spotlight bracket, for fitting to cars where it mounts on the front panel valance and grille support panel, giving it perfect rigidity so that the power of the lamp was not impaired. Many cheap aftermarket...
You should always use this kit for fitting any auxiliary spot or fog lamps.
Kit contains wiring and safety relay-cheaper than a burnt out engine compartment.
Please note, SPI and MPI cars have this facility built as standard safety ...
Four LA1009 halogen black bodied driving lamps approximately 170mm wide by 58m deep with 4-XBU10046 stainless steel fitting brackets.
chrome on brass original type hexagonal screw for the chrome rear lamp BHA4153
Pair of Chrome WIPAC spotlights. 135mm in diameter, 60mm deep with covers. The lamp is nearly all forward of the mounting bracket making it great for fitting in front of mini grilles. Bulbs are H3 type 55 watts GLB453.
Copies of the originals in vinyl
Incorperating the original small clear window to show if the lamp remains switched on.
This lamp unit comes without a bracket and will fit either side, if your bracket is okay. The unit only comes from Rover with bracket but costs £29-93 so we supply it less a bracket at £10-00 savings. If you require a bracket for the right hand it is...
The "Beehive" lens are used throughout the British car range! (Front and rear). Available in various colors: Clear (frosted) GLASS.
Glass "beehive" lenses, either clear or amber, were used on the front turn signals on MKI and MKII Minis...
Copy of the original heavy duty works lamp bar with all fittings but now in stainless steel for longevity.This type was used on LBL66D on the 1967 MONTE CARLO RALLY WITH THEIR NOW LEGAL LIGHTS Consists of a central support bracket and 2 end supports ...
Late model cars have these bright red auxiliary "safety lights" mounted below the rear bumper. They are to be switched on during inclement weather. Upgrade for your safety, a legal rquirement on late cars.
These plugs are for the 3/8" holes in the front panel where the spot or foglamp brackets would be fitted, on late front panels.
This will replace the orange lens fitted on the wing of all cars from 1986 on, fitted with an orange LED. If you need a new loom for this lamp see AFU3358. Sold singly. Does not require a resistor.
Resistor for AFU3389LED and AFU3389WLED, this is needed to enable the lamps to function properly. Sold in pairs.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.