($20.00) £20.00 exc vat
($24.00) £24.00 inc vat
In stock
($20.00) £20.00 exc vat
($24.00) £24.00 inc vat
In stockRecommended usage 2 x MSSB1113 to fit one mini.
Static 3 point fixing front seatbelt with the female fixing on a stem.
Static 3 point fixing front seatbelt with the female fixing on a stem.
3 point automatic rear seat belt. These seat belts do not use the standard C post nor the MPI fixing in the rear pocket. They require the fitting of the real on to the parcel shelf. These seat belts will work for all minis up to 1996
<...
3 point automatic rear seat belt. These seat belts do not use the standard C post nor the MPI fixing in the rear pocket. They require the fitting of the real on to the parcel shelf. These seat belts will work for all minis up to 1996.
...
Auto retractable seat belt kit. Sold per seat. The manufacturer states that these belts are direct replacements for the pre tensioner types fitted in Europe.
It will arrest the wearer within the same tolerances without a need for a...
Auto retractable seat belt kit. Sold per seat. The manufacturer states that these belts are direct replacements for the inertia reel type fitted from 1976 including the later pre tensioner type. Not suitable for MK1/2 saloons and vans/pickups due to...
Seat front base foam replacement. Moulded foam base and only one available solely from us, has been used on 1993 to 2000 cars. Made from sample from Rover of HGA100840
FIA spec anchor plate for eye bolts, used when fitting harnesses. Sold individually, 7/16 UNF 65x65x3mm.
Front seat base foam.This cushion can be used for most models with single pole headrest from 1985-92 before the introduction of moulded seats. It is approx. 2" thick with raised sides and deeper version of SF3010 which it replaced to giv...
In 1993 the seat frames were changed and although the base frame looks very similar to earleir models, there is a difference in the shape. At this time the seat diaphragm was changed to a special rubber/woven design known as the "Suisiara" model. The...
Bracket on the crossmember that holds the seat.
2 required per seat.
with headrest-this fixed back traditional bucket seat is the entry level
version of Cobra seats and has deep sides and a low back to ensure comfort and support without the restrictions of a larger seat. Vinyl
Universal to fit many vehicles and definately the mini for all Cobra seats but beware if your original seats lock down to the floor as a safety requirement. These do not lock down. The MOT testers in the UK could fail you if yours were originally th...
If your vehicle had a seat that locked to the floor it is an MOT requirement that you fit that type of fitting seat back in for safety requirements. This seat frame will allow you to fit the Cobra range of seats to your mini.
See [link]SEAT1...
Also used for other trim areas this clip holds the vinyl or fabric of the seat covers to the metal framework.This part has larger D shape and claw spikes but if you want the smaller D shape and claws for headlining and rear seat covers see[link]14A80...
without headrest-this fixed back special narrow seat was especially designed to work where space is at a premium -It's low back is ideal for sports cars and vintage.Seat can bolt to floor if accessable or on Cobra seat frames--The seat is about 18" w...
Seat Spacers.
If you think you are too tall for the Mini. These brackets allow you to really stretch out.
If your vehicle had a seat that locked to the floor it is an MOT requirement that you fit that type of fitting seat back in for safety requirements. This seat frame will allow you to fit the Cobra range of seats to your mini.
See [link]SEAT1...
The clips that hold the seat squab vinyl to the frame on front seats and the headlining. These clips are available seperately as GHF1500.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.