BRAKE MASTER CYLINDER TO SERVO BODY SEAL 89 ON

Seal for between the brake servo and master cylinder, fits all late 1988 onwards vehicles where the master cylinder was mounted directly to the servo unit.

($1.25) £1.25 exc vat

($1.50) £1.50 inc vat

BRAKE MASTER CYLINDER REPAIR KIT FITTED FROM 1995 ...

GRK1039

Master Cylinder repair kit for repairing the late GMC90376 master cylinder that was attached to the servo from 1995 until the end of production this kit uses a longer seal in conjunction with a nylon bearing. If your master cylinder has a drill hole ...

($17.49) £17.49 exc vat

($20.99) £20.99 inc vat

MASTER CYLINDER METAL CAP ORIGINAL TYPE

17H3723

Replacement metal master cylinder cap as originally fitted to 1959-1963 Minis on single line brake systems is a great historic feature.

($6.00) £6.00 exc vat

($7.20) £7.20 inc vat

BRAKE MASTER METAL BODY ORIGINAL TYPE

GMC171ORIGINAL

Original AP Lockheed type metal body master cylinder.

Fitted with a plastic cap the metal original alternative is available seperately as 17H5323

Ensure the correct DOT4 or DOT5.1 brake fluid is used as these cylinders...

($93.00) £93.00 exc vat

($111.60) £111.60 inc vat

BRAKE MASTER CYLINDER REPAIR KIT FITS GMC171/2 PRE...

GRK1028

Almost every Mini built prior to the dual circuit system uses a .70" bore master cylinder. This kit fits them all. The original size in the '59-'64 Mini was .75" but as most of these cylinders have been replaced with the .70" size it is best to check...

($10.05) £10.05 exc vat

($12.06) £12.06 inc vat

BRAKE MASTER CYLINDER FOR SERVO TYPE 88on

GMC90376

Genuine AP Lockheed boxed - Made in UK - fitted from 1988 on, this master cylinder uses a built in servo.

This master cylinder was used right up to the last production twin point vehicles from Rover. Bore size is 20.6mm(.811").

See ...

($88.00) £88.00 exc vat

($105.60) £105.60 inc vat

BRAKE LIMITER VALVE 78 ON (FITTED IN ENGINE BAY)

FAM7821

This twin line brake PDWA valve is fitted on the front bulkhead of the engine bay from 1978 on as opposed to the single line valve which was fitted on the rear subframe.

Fixing bolt is 2.25" long UNF 1/4. The 4 Brake unions are all metric. ...

($78.00) £78.00 exc vat

($93.60) £93.60 inc vat

BRAKE MASTER CYLINDER 1980-89 (YELLOW IDENTITY TAG...

GMC227

Genuine AP Lockheed boxed and made in UK. FRONT TO REAR master is the latest model dual master cylinders, which was introduced in 1985 with a stepped bore of 17.8 to 19mm to replace any previous master cylinders from September 1978 to 1988 when the b...

($93.00) £93.00 exc vat

($111.60) £111.60 inc vat

REAR WHEEL CYLINDER RETAINING CLIP

17H7949

If your wheel cylinder does not bolt on it uses this special clip. Some new wheel cylinders come with this clip included so check on ordering.

($0.54) £0.54 exc vat

($0.65) £0.65 inc vat

COOPER S METAL BRAKE MASTER CYLINDER

GMC172

This master cylinder had a larger capacity fluid bowl 3" high and was fitted to all cooper S and 1275GT with single line brakes. Will also fit standard single line mini if you are looking for larger capacity fluid reservoir especially when using cali...

($88.50) £88.50 exc vat

($106.20) £106.20 inc vat

FRONT WHEEL CYLINDER R/H GENUINE

GWC126

R/H front wheel cylinder for twin leading shoe drum brakes. 1964 on with bleed nipple. Gasket 37H3833 x1 supplied. These are 0.9375" bore size which is larger than the MK1 type and use GRK2002 repair kit.

2 require...

($16.34) £16.34 exc vat

($19.61) £19.61 inc vat

FRONT WHEEL CYLINDER L/H GENUINE

GWC127

Genuine original AP lockheed L/H front wheel cylinder for twin leading shoe drum brakes for cars from 1964. Bleed nipple included and37H3833 gasket. These are 0.9375" bore size which is larger than the MK1 type and the repair kit is [lin...

($16.34) £16.34 exc vat

($19.61) £19.61 inc vat

REAR WHEEL CYLINDER TO BACK PLATE GASKET

37H4642

Paper gasket fitted between the rear wheel cylinder and the backplate. Once supplied with genuine wheel cylinders AP now seem to have discontinued this practice.

($1.25) £1.25 exc vat

($1.50) £1.50 inc vat

GENUINE AP LOCKHEED HANDBRAKE LEVER GAITOR

17H7612GENUINE

Rubber gaiter to keep debris from entering the drum via the backplate handbrake lever SMN10005. Sold singly per backplate, 2 required per car.

Genuine AP Lockheed rubber boot

($5.03) £5.03 exc vat

($6.04) £6.04 inc vat

BRAKE PIPE KIT RIGHT HAND DRIVE CONVERSION FOR GMC...

BAU5654MS

We now supply 2 easy bend copper nickel pipes with the correct unions for when converting to the later type GMC227 front to rear split master cylinder.

($16.51) £16.51 exc vat

($19.81) £19.81 inc vat

BRAKE PAD SET ULTIMAX STREET 7.5 DISC

GBP103ULTIMAX

Our favourite pads as the give less brake pad dust which destroys alloy wheels.

Very durable and great for most road usage. The green upgrade for fast street is C-8G8995GREEN.

($28.16) £28.16 exc vat

($33.79) £33.79 inc vat

BRAKE CONVERSION KIT 8.4" TO 7.5" BRAKES USING MS ...

MSSK013MS

12" wheel to 10" wheel running gear conversion kit. Less wheels.

This kit will convert your 8.4 disc set up to the Cooper S 7.5 discs to allow fitment of 10" wheels, kit includes discs, calipers, kevlar pads with split pins and drive flanges...

($173.34) £173.34 exc vat

($208.01) £208.01 inc vat

BRAKE CALIPER 8.4" DISC R/H NEW UNIT

37H8128

Genuine Mini Spares R/H caliper for 8.4" disc set ups remanufactured exclusively for Minispares. Lots of alternatives on the market but AP no longer make the originals but as their largest agent for Mini these are our own and fully tested.

C...

($54.31) £54.31 exc vat

($65.17) £65.17 inc vat

BRAKE CALIPER 8.4" DISC L/H NEW UNIT

37H8129

Genuine mini Spares L/H caliper for 8.4" disc set ups remanufactured exclusively for Minispares. Lots of alternatives on the market but AP no longer make the originals but as their largest agent for Mini these are our own and fully tested.Caliper fit...

($54.31) £54.31 exc vat

($65.17) £65.17 inc vat

BRAKE REGULATOR PRESSURE VALVE MK3 EXCEPT COOPER S

21A2031

All MK3 minis to 1978 except Cooper S MK3 which used 21A1774.

Fitted mainly to cars with 3/4" larger bore rear wheel cylinders.

The correct regulator valve for all MK1/2 mini plus all Cooper S inc MK3 is 21A1774 where m...

($61.00) £61.00 exc vat

($73.20) £73.20 inc vat