(13,84 €) £13.84 exc vat
(16,61 €) £16.61 inc vat
In stock
(13,84 €) £13.84 exc vat
(16,61 €) £16.61 inc vat
In stockRecommended usage 1 x CTB100060 to fit one mini.
Complete car set of stainless steel screws for the piano hinge type opening rear quarter light windows.
Tinted fixed rear 1/4 glass for mk3 onwards cars.
Rear screen seal for mk1 cars which had the smaller rear window 1959-1967.
Rear window catch fitted to the rear sliding windows on Estate cars(Mini station wagon)Original type plastic catch. If they rattle we suggest you add a piece of thin rubber/sponge with a small drop of adhesive.
The black windsreen and backlight rubber fillet. Chrome is more popular however.
A single length for a single screen is 37H8052
Front and rear screen with chrome plastic insert.Saving nearly 15% on cost of individual partts
This flat rubber seal can be use for opening rear 1/4 windows or radiator to inner wing. Supplied in 2 metre lengths. 38mm wide.
can also be used on the petrol tank straps and plinths
Genuine Mini Spares mouldings product as supplied to Rover.
These are the later door mouldings that prevent water running down the windows into the door causing rust and have the black platic ends fitted for later car safety regulations but ...
For the rear opening type quarter light, glass only in sundym, MK3 ON.
Genuine Mini Spares product as originally made by Pianoforte and then Mini Spares for Rover.Clips for this are EYC10048
This is the 1/2" tall thinner type fited to wind up window cars from 1970 on.
The original 1" talle...
This windshield has a very slight tint all over, barely noticeable but enough to reduce glare and make the car cooler inside. Fits all years and models of Mini
except twin point cars which have built in mirror base. IF A MAIL ORDER OR INTER...
Genuine MK3 wind-up window upper slide up and down felt lined channel that fits into the R/H upper door frame. Left (PAM3077) and right (PAM3076) look identical but are mirror images.
Genuine MK3 wind-up window upper slide up and down felt lined channel that fits into the upper door frame. Left (PAM3077) and right (PAM3076) look identical but are mirror images.If you are looking for a cheaper budget version see PAM3077MS
...
Genuine Mini Spares mouldings product as supplied to Rover.
These fit on the inside of the door as a draft excluder for the window, on all wind up window cars from 1970 on.
Never have a misted up front screen again. As used on Monte Carlo and other top Rally cars. 2 horizontal silver bands/element wires going across the screen a few inches from the top and 3.5 inches from bottom. Not suitable for twin point cars as the ...
pair of outer door seal mouldings and fixing clips
These are the original type without the black plastic ends which were introduced on later models for safety criteria. All outside moudings are interchangable but are sided.
Genuine Mini Spares mouldings product as supplied to Rover.
Pair of the later door outer mouldings plus ADH3809 clips to help prevent water running down the windows causing rust.
These have black plastic ends for car s...
All mini windscreen and backlights have this plastic moulding in the middle 99% of the time. Chrome in colour, this is on a 30metre roll for trade use.
PW5013 is the black equivalent.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.