Proper timing of the camshaft is very important and while it is easy and nice to do it with a precise adjustable cam sprocket it is also cheap to do it with offset cam keys. 1 or 2 degrees difference in cam timing can make a difference in performance...

Proper timing of the camshaft is very important and while it is easy and nice to do it with a precise adjustable cam sprocket it is also cheap to do it with offset cam keys. 1 or 2 degrees difference in cam timing can make a difference in performance...

woodruff key to fit in the camshaft to hold the larger timing chain gear. See 6K836 for the crankshaft keyway for the lower smaller timing chain gear

Woodruff key for the end of the crankshaft to locate the lower timing chain gear and WKN505 is for the camshaft key to hold the larger timing gear.

For high performance engines an efficient crank damper is a necessity to reduce failure. The standard damper commonly used is barely adequate for the standard engine. Mini Spares has reproduced the original "S" damper and pulley-far superior to the s...

This thinner crankshaft oil seal was used on the later belt drive kits with a plastic cover and larger diameter crank gear

Standard cast duplex gear set from the original AE supplier. for road use only.

Found to be the best fitting in Mini Mag feature Autumn 2007.

Driving the cam and controlling the timing relationships between the cam and the crank i...

Timing belt camshaft drive systems have been around for a number of years, in fact for a lot longer than the life expectancy of the belts. If you have a belt drive conversion you should have one of these replacement belts. If you want to keep things ...

Fitted to most cars pre 1980 with either dynamo or alternator, plus 998 from 1985 and 1275 from 1990 when smaller pulley CAM6239 was used, this was mainly on automatic cars.

CAM6239 pulley 3.875" wide and CAM6408 pu...

Unpainted crank pulley for high performance engines, an efficient crank damper is a necessity to reduce failure. The standard damper commonly used is barely adequate for the standard engine. Mini Spares has reproduced the original "S" damper and pull...