(258,33 €) £258.33 exc vat
(310,00 €) £310.00 inc vat
In stock
This kit is for wind up window type doors,for MK3 saloons with inertia seat belts from 1974 onwards and contains 2 door trims,2 rear quarter trims,rear parcel shelf,2 rear glove box trims and 2 rear wheel arch covers which require sticking on.
Cooper S and Mini 1970-73 had a different grain pattern and is only available in Black([link]TK3007A[/link] or Navy [link]TK3007N,but after 1974 many trim changes took place and this MK1 grain style has been designed to replace any wind up window saloon at a budget price pre 1996.
From 1996 the rear parcel shelf was modified for the rear seatbelts on the "C" post. MkIV Heritage bodyshells have these C posts also.
(258,33 €) £258.33 exc vat
(310,00 €) £310.00 inc vat
In stockRecommended usage 1 x MSSK1009 to fit one mini.
This plastic clip was commonly used by Rover for all car trimming and first found its way on the wind up window version mini door panel.9 per side but always purchase a spare in case of breakages.
Reinforced elastomer liner for door trim made from VELVEX to prolong the life of your door cards.Die cut on press tools that make the original door cards. Each hole for door locks, window winders, door handles, speaker holes are precision cut to fit ...
Mk1/2 style pattern door and rear quarter red vinyl trim kit
These are the 4 major parts that can give your car a fresh look- only fits wind up widow type doors as fitted to MK3 range mid 1973 , without ash tray facility in rear glove box
Black with mirror, optional colour aftermarket sun visor for Mk3 models which were thinner than pre 1965 cars for safety requirements. Will fit cars from December 1965 on. Check out the special clips to hold these visors as they are sold seperately ...
Black sun visor less mirror that requires clips both ends but never a standard fitment colour fits cars from Dec 1965. Available as a sought after alternative to the cream colour. The brackets are available as a car set only(4 clips) as SV20...
Ideal for solving the problem of fitting extra speaker's, this speaker board is simple to fit, and well finished.holes are oval shaped 6"x9"
Full carpet boot liner kit, completely lines the inside of the boot area.
Not suitable for MPI minis.
Full carpet boot liner kit, completely lines the inside of the boot area.
Not suitable for MPI minis.
Multi purpose square plastic plug/nut for No8 screw size was used on many door fixings and fuse box to body.
Also suitable for Twin Point indicator fixings.
Metal plate switch carrier for 5 square type switches.
The metal retainer that holds the rod change gear lever gaiter CZH4278 in place
Original BMC stick on logo for use on gearlever knobs and key fobs sold by us.
about 27.4mm wide
MK1/2 style pattern door and rear quarter black vinyl trim kit for MK3 on
These are the 4 major parts that can give your car a fresh look- only fits wind up window type doors as fitted to MK3 range mid 1973 on , without ash tray facility in...
Fitted 1969-77 and 1992-96 originally and white from 1970-96 so see PAM5401BLACK and PAM5401AP. C posts trims changed with MPI or Heritage shells.
These headlinings are held in by different shape/length rods which a...
Metal chromed old type classic handle revived for use on MG variants and then a fashion item on minis. On later cars CMZ312 screw might be required which has a smaller diameter head and longer thread. Length 90mm.
Favourite old ashtray for MK1/2 minis with the fluted top for the rear glovebox and facia. Fitted to minis with painted top dash rail from 1959-85.
See 24A1538 also for flat lid version as fitted when top dash rail is vinyl cove...
A bit larger than the MK1 to accept the improved indicator switch this fitted
MK2 and MK3 cars until the introduction of the steering locks.
This is the top of the range spray glue that is used to make all our trim products. We recommend you use spray glue to fit your trim products to your car (where applicable). You can use the glue to fit underfelt and carpets to your floor pan, your fo...
Union Jack stick on logo for use on gearlever knobs and key fobs sold by us.
About 27.4mm wide.
Chromed version of the standard demist vent on early cars where the ashtray is
mounted in the top and middle of the metal facia. Not for later cars with large
padded windscreen rails and ashtray in the front such as Mini Clubman and...
Fire retardent felt with correct cut outs for MK3 cars for the mini firewall just behind the carb and air cleaner full width of the panel see FELT860 for spray adhesive.
This 10 piece handle set is exactly the same kit as sold by every other mini specialist is in bright alloy (not polished alloy as per our other superior kit MSA1129) and consists of two of each of the following, door openers, window winders and their...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.