£8.64 exc vat
£10.37 inc vat
In stock
£8.64 exc vat
£10.37 inc vat
In stockRecommended usage 1 x CZH4315 to fit one mini.
In 1993 the moulding between the wheel arches was changed from black plastic to rubber and was still used on twin point rubber arches. This is a Rover part but is different to what was originally fitted. Alternatively GZF105A and [link]G...
Original genuine rubber wheel arch to body seal with self adhesive backing. Factory fitted to all late Minis with either Sportspack arches or colour coded plastic arches.
Length 107cm. Sold individually.
Black Plastic Fluted Strip, runs between the 2 plastic Mini Special Arches. Fitted as standard from 1984 to 1992. Approximately 1270mm long.
In 1993 the moulding between the wheel arches was changed from black plastic to rubber and was still used on twin point rubber arches. This is the Minispares version which is a slightly more rounded profile.
Factory fitted rivet for the mini special wheel arches, the plastic type fitted as standard from 1984 to cover 12" wheels.
16 required but beware of the front rivet on the rear wheel arch as it goes through a double skin. 5/32" TYPE 7/16" LO...
A full set of four arches and two side trims as fitted to all factory cars from 1984 on as standard fitment. Kit includes set of black screws although some were originally held on by pop rivets ADU8629
Group 2 fibre glass wheel arches in premium black finish not requiring paint, judged the best on the market available by our customers, they stick out 1.75" including lip, when bodylines (wheel arch and moulding lip) are kept original. Screws are vis...
Factory fitted rivet for the mini special wheel arches, the plastic type fitted as standard from 1984 to cover 12" wheels.
16 required but beware of the front rivet on the rear wheel arch as it goes through a double skin. 5/32" TYPE 7/16" LO...
In 1993 the moulding between the wheel arches was changed from black plastic to rubber and was still used on twin point rubber arches. This is the Minispares version which is a slightly more rounded profile.
Original metric fixing nut for genuine Rover sportspack arches.
A full set of four arches and two side trims as fitted to all factory cars from 1984 on as standard fitment. Kit includes set of black screws although some were originally held on by pop rivets ADU8629
The last product from the factory in wheel arches (flares) are these fancy "Sportspack" arches. Factory originals are expensive but this fibreglass set will give the same look. Also see ARCH001. As with all fibreglass products, some modi...
Black Plastic Fluted Strip, runs between the 2 plastic Mini Special Arches. Fitted as standard from 1984 to 1992. Approximately 1270mm long.
Screw on black plastic wheel arch as fitted to factory specials plus innocentis and all minis from 1984 on until the sportspac arch. The grey type fitted to Mayfairs are no longer available. This is the Right hand rear and ready to screw on.
Screw on black plastic wheel arch as fitted to factory specials plus innocentis and all minis from 1984 on until the sportspac arch. The grey type fitted to Mayfairs are no longer available. This is the left hand front and ready to screw on.
Screw on black plastic wheel arch as fitted to factory specials plus innocentis and all minis from 1984 on until the sportspac arch. The grey type fitted to Mayfairs are no longer available. This is the right hand front and ready to screw on.
These are good fitting plastic ABS arches and the same profile as the original W&P type arches but a 1/4" wider @ 2.5" wide approx on the front. Comes with wheel arch to body trim and rivets.
these come in a satin black finish, but...
Genuine Rover as fitted from 1970 on as standard. Real chrome foil inlay unlike GZF107MS which is actually silver but looks chrome--buy the Genuine real thing at the right price.
This is the genuine flat type chrome trim that...
Right hand front
Genuine moulded wheel arch as fitted to the sports pack mini with 13" wheels has now been upgraded with a brass insert to take a stud ZUA000250. This item does not include the stud or the black rubber seam mould...
In 1993 the moulding between the wheel arches was changed from black plastic to rubber and was still used on twin point rubber arches. This is a Rover part but is different to what was originally fitted. Alternatively GZF105A and [link]G...
Roof gutter trim clip in stainless steel, ideal finishing item for our MT632 roof gutter trim.
Minispares 2 piece plastic roof moulding kit specially shaped for the corners and drain holes as fitted from 1980on in black.
The 2 joining and finishing clips are DBE10006PMD which need to be ordered seperately. The last Rover...
Original MK1/2 shape Windscreen washer cycle type bottle clip, about 1964 on.
Has yours disappeared, or just disintegrated with age?
The original winguard MK1 bottle part number was ADA3833 NOW 17H2536 for MK1/2.
<...
Original MK1/2 shape with correct 1.25" small neck.
Originally made by Winguard these plastic washer bottles for early Minis were often asked for but rarely available.
The original part number for the Winguard MK1 bottle was ADA383...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.