MPI GREY CLOTH HEADLINING KIT 1996 ON HL3015P
HL3015

£129.05 exc vat

£154.86 inc vat

In stockIn stock
Headlining kit for MPI cars, this is grey cloth as apposed to vinyl (much nicer in our opinion). Rear C post panels included.

£129.05 exc vat

£154.86 inc vat

In stockIn stock

Recommended usage 1 x HL3015 to fit one mini.

Recommended products

Complete car set of roof lining rods, comprising of 1 Red, 2 White, 1 Black, 1 Blue and 1 Yellow

number 1 with red ends is EEB100060

number 2 and 3 is white ends are both EEB100070

number 4 with black ends is EEB100080
...

People also bought products

Our lightweight underfelt kit is the perfect companion when fitting a new headlining. Made from lightweight felt and cut to size, this fits into the cavity of the roof before fitting your new headlining and provides increased sound insulation and pro...

Complete car set of roof lining rods, comprising of 1 Red, 2 White, 1 Black, 1 Blue and 1 Yellow

number 1 with red ends is EEB100060

number 2 and 3 is white ends are both EEB100070

number 4 with black ends is EEB100080
...

Fitted 1969-77 and 1992-96 originally and white from 1970-96 so see PAM5401BLACK and PAM5401AP. C posts trims changed with MPI or Heritage shells.

These headlinings are held in by different shape/length rods which a...

MK3 minis introduced a different headlining which was held up by rods rather than the MK1/2 type which were attached to a frame. There are five different colour codes on the 6 rods:

number 1 with red ends is EEB100060

n...

MK3 minis introduced a different headlining which was held up by rods rather than the MK1/2 type which were attached to a frame. There are five different colour codes on the 6 rods:

number one with red ends is EEB100060.

Grey with mirror fitted aftermarket sun visor for Mk3 models 1970-77 and 1992-96 which were thinner than pre 1965 for safety crash requirements. Check out the special clips to hold these visors as they are sold seperately in car sets only as [link]SV...

Plain grey aftermarket sun visor for Mk3 models 1970-77 and 1992-96 which were originally thinner than Mk1 for safety crushing requirements-Will fit any mini from December 1965. Check out the special clips to hold these visors as they are sold sepera...

A car set of 4 special plastic clips and screws to hold in the sunvisors from december 1965 on SV2016P, SV2016W and SV2017P, SV2017W. For use on visors from 1965 that have a hinge either end.

MK3 minis introduced a different headlining which was held up by rods rather than the MK1/2 type which were attached to a frame. There are five different colour codes on the 6 rods

number one with red ends is EEB100060

number 2 and ...

The clips that hold the seat squab vinyl to the frame on front seats and the headlining. These clips are available seperately as GHF1500.

These headlinings are held in by different shape/length rods which are NOT included but we do include the rear corner cloth side sections between the rear side window and backlight which are not in other suppliers kits. Fitted 1977-92

Also...

See also PAM5401LNG and PAM5401AP

These headlinings are held in by different shape/length rods which are NOT included but we do include the rear corner cloth side sections between the rear side window and backlight ...

MK3 minis introduced a different headlining which was held up by rods rather than the MK1/2 type which were attached to a frame. There are five different colour codes on the 6 rods:

number 1 with red ends is EEB100060

n...

This universal trim clip with smaller D shape and exta short claws section is for rear seat and for headlings. For MK1/2 minis and Traveller/Estate versions there are 25 and MK3 on there are 13.

For the clip with a larger D and claw spike se...

Similar to those fitted as standard on the late Coopers this piece of trimming is purely cosmetic although it may help to eradicate some road noise that might get past the standard rubber gaiter--This is black with red stitching.

Full carpet boot liner kit, completely lines the inside of the boot area.



Not suitable for MPI minis.

Multi purpose square plastic plug/nut for No8 screw size was used on many door fixings and fuse box to body.



Also suitable for Twin Point indicator fixings.

Metal plate switch carrier for 5 square type switches.

127cm long and 43cm wide this is enough leather cloth trim that fitted S and deluxe models on the upper and lower facia plus the winscreen A posts. Fitting instructions are included but no glue.

The metal retainer that holds the rod change gear lever gaiter CZH4278 in place