(¥40) £40.00 exc vat
(¥48) £48.00 inc vat
In stock
(¥40) £40.00 exc vat
(¥48) £48.00 inc vat
In stockRecommended usage 1 x 14A7246 to fit one mini.
early slider catch for Mk1 pre mk2 which used ALA6992.
Leather Bonnet Straps.
Black leather bonnet straps, sold in pairs and at a very cost effective price. These straps are great and can be used for everything from the bonnet to the tool box.
Black rubber bung to hold the bonnet prop in place on MK1/2 minis.
Also the same profile and shape as the rear boot board buffers but nearly twice the length at 1.5"(38.3mm).
the clubman had a longer and wider spring for the bonnet release thimble
3.25"long and 1.5" wide
Bent or missing bonnet prop? For the Clubman models you will have to straighten it by hand as the original is obsolete. Correct to latest shape fitted on mini saloons--only one in current production, Fits all. Replace it---Dont forget it and buy a ne...
This is the hook part with a spring and spacer only. This fits all Minis and Clubmans as the bracket it attaches to is on all bonnets unless broken. The spring loaded catch is designed to keep the bonnet from blowing open while driving should the lat...
This very heavy duty bonnet strap is a excellent reproduction of the original factory Special Tuning department special. Original light colour Tan leather
3.3mm thick from the tanneries for use on horse bridles, with alloy fastening. Screws ...
For competition use these pins are the only sure way of holding your bonnet down in place
Bonnet Hinge LH 1981 on. Fits Clubman also but make sure you are using an identical pair for your bonnet
1971 to 1980 hinge is CZH531
The metal clip that holds the bonnet prop to the bonnet.
Bonnet Hinge RH 1981 on. Fits Clubman also but make sure you are using an identical pair for your bonnet
1971 TO 1980 hinge is CZH530
Tension spring for the bonnet lock pin release on all clubman cars plus the twin point cars where the bonnet hook location was moved and all cars had an internal bonnet release cable. Total length 83mm.
This is the metal clip that actually holds the prop to the bonnet at the front
edge.
Bonnet locking pin used for all minis except clubman types.
3/8" unf thread.
Standard mini bonnet spring for thimble on front is 2.5"long new and 15/16" wide
and will not fit the clubman bonnet which is 1.5"wide and 3.25" long
This is the guide plate for the bonnet locking pin, now in stainless steel.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.