Countersunk, crosshead screw. 1/4"unf 19mm (3/4") total length.

This screw fits the internal door hinges on wind up window cars and the striker plate on the B post.

These shims are what the factory used to fit on the other side of the hinge panel as a stiffener and sometimes even to align the doors themselves, 2.2mm thick.

This is a Non genuine L/H outer MK3 door skin.

It does not fit as well as the genuine CZH3301 but a good inexpensive replacement less mirror holes.

This is a Non genuine L/H outer MK3 door skin in lightweight Aluminium

It does not fit as well as the genuine CZH3301 but a good inexpensive replacement less mirror holes. Nearly 3kg lighter than the standard doorskin.

Genuine L/H door without crash bar which only later cars had fitted. This door also has no hinges.This door also has no hinges. L/H door framework is available as MSP021.The later type door with the crash safety bar fitted internally are...

Mk3 Mini onwards door frame assembly without the door skin R/H.

Supplied unpainted ready for door skin fitment.

Non genuine R/H repair section

for wind up window type doors this is the lower 2-3" of the inner skin and the bottom of the door section that usually rusts out-includes a lip section where the outer skin flaps overlaps for fitment--new panel...

non genuine R/H outer MK3 door skin.

not as good a fit or looking as the genuine CZH3301 but a good inexpensive replacement less mirror holes

The genuine outer skin only for L/H doors with wind up windows without door mirror lug nuts but holes for fitting ADU2038 nutserts. A doorframe is also available as MSP021.

Mini Spares own MK3 Window drop rail kit includes 1 x ALA5746SS AND1 x ALA5747SS plus 2 x 24A948 seals for the drop rails to hold the glass, this kit will do one complete door only.

Stainless steel version of CZG5254 door striker plate. These used to be sided on earlier models but now fit either side. CZH627 striker plate lock with a loop fits into this. Supplied in pairs with stainless steel fixing scr...

Special thread cutting screw 1/4 UNF 1.25" (31mm) long.

Screw to hold the lock assembly on the door of MK3 cars with internal hinges and wind up windows. On new doors or for easy fitment use these special screws with cutting thread (3 sided ...

Mini Spares own MK3 Window drop rail kit includes 1 x ALA5745 KIT with the 2 rails which are different front an rear (ALA5746 and 5747) plus 2 x 24A948 seals for the drop rails to hold the glass, this kit will do one complet...

Sponge type seal on L/H A post of all minis with wind up window type doors to protect from water running down into body. A part you must keep your eye on to stop rust.

Holds the window regulator to the door on wind up window minis from 1970 on.

Also holds fog lamp bracket to rear valance. 1/4" unf with 1/2" thread on

panhead type screw.