VERTO CLUTCH DISTANCE PIECE BOLT CAN USE SH604145
SH604141

(¥1) £0.56 exc vat

(¥1) £0.67 inc vat

Out of stockOut of stock
The longer bolt that goes through the metal sleeve on the slave cylinder has been supplied on cars as a setscrew and a bolt in zinc finish but the black bolt SH604145 is cheaper and stocked by us in the hundreds---we can order this from Rover but it is only a 1/4"UNF standard setscrew 1.75"long

(¥1) £0.56 exc vat

(¥1) £0.67 inc vat

Out of stockOut of stock

Alternative products
OIL PUMP BOLT CONCENTRIC/TURBO. SEE NOTES.
BH604141

1.75" LONG shouldered 1/4" bolt fits original concentric pumps plus some GLP139 and GLP110MS - check that you need a bolt this length as many later pumps require shorter bolts. This can of course be cut down or see [link]BH6...

(¥1) £0.83 exc vat

(¥1) £1.00 inc vat
BOLT 1/4"UNF x1.75" long FOR C-AJJ4009
SH604145

Dual use bolt-used on clutch and our C-AJJ4009 anti roll bar kit.

It also fits the verto slave cylinder bracket. This is the longer bolt which goes through the spacer fitted between the DAM5992 bracket and clutch ho...

(¥0) £0.38 exc vat

(¥0) £0.46 inc vat
People also bought products
CLUTCH INSPECTION HOLE BOLT & PULLEY TO WATER PUMP
SH604041

Until the Verto/injection type cars most minis had a small inspection hole for checking timing at the top of the clutch housing. These 1/4"unf bolts 1/2" long hold on that plate but you can use shorter type SH604031 also.

Also ...

(¥0) £0.38 exc vat

(¥0) £0.46 inc vat
CLUTCH THROW OUT LOCKNUT FOR 22A180 PLUNGER
NT610041

The locking nut for the clutch throw out plunger 22A427

(¥1) £1.20 exc vat

(¥1) £1.44 inc vat
CLUTCH THROW OUT PLUNGER LARGE NUT
22A427

The large special shape nut on the adjusting end of the clutch plunger which holds the release bearing. The flat locking nut for this is NT610041. need a 15/16 spanner

(¥8) £7.50 exc vat

(¥9) £9.00 inc vat