SPOTLAMP MINI COOPER GENUINE WITH PLUG TO LOOM
XBN10008

(¥62) £61.55 exc vat

(¥74) £73.86 inc vat

Out of stockOut of stock
NOW N.L.A Was fitted as original equipment- check whether you have spot or fogs-standard on injection cars. 150mm diameter with lugs at top and botton which means it will not fit our spotlight grilles and is approx 65mm deep. This is made to fit the...

(¥62) £61.55 exc vat

(¥74) £73.86 inc vat

Out of stockOut of stock

Spot and fog lamps - Qty 2

Recommended products

Bulb for the genuine spots on SPI and MPI cars -usually ordered to customers request.

Kit contained products

Auxilary wiring for genuine Rover spot and fog lamps needed when fitting genuine lamps to cars not originally fitted with auxilary lamps or for cars that have had the wiring damaged. This loom is supplied with complete lamps XBN10008 and...

People also bought products

NOW N.L.A was the lamp only less wiring.Fitted as original equipment check whether you have spot or fogs-standard on injection cars.

(number on lens 048025 )

150mm diameter with lugs at top and botton which means it will not fit our...

Pair of high power Chrome Fog lights. 5.5"( 135mm )diameter, 50mm deep with durable plastic covers. Universal fitting. The lamp is nearly all forward of the mounting bracket making it great for fitting in front of mini grilles. Bulbs are H3 type 55 w...

Minispares design spotlight bracket fitted to cars where it mounts on the front panel valance and grille support panel giving it perfect rigidity so that the power of the lamp was not impaired. Requires a M8 metric nut. Many cheap aftermarket product...

Minispares design heavy duty STAINLESS STEEL spotlight bracket, for fitting to cars where it mounts on the front panel valance and grille support panel, giving it perfect rigidity so that the power of the lamp was not impaired. Many cheap aftermarket...

You should always use this kit for fitting any auxiliary spot or fog lamps.

Kit contains wiring and safety relay-cheaper than a burnt out engine compartment.

Please note, SPI and MPI cars have this facility built as standard safety ...

Four LA1009 halogen black bodied driving lamps approximately 170mm wide by 58m deep with 4-XBU10046 stainless steel fitting brackets.

Larger than the S6007 chrome lamps and narrower than the RL020 these black plastic backed lamps also find their way on single and twin point injected cars as replacements for the original Rover lamps.

Bulbs are H3 t...

This is known as a metalastic type bush as it is metal on the outside and inside with a layer of rubber between. Used on the rear rod change gearbox as a stabiliser bush for the rod change it is also used on our rear anti roll bar kits where appropri...

Pair of Chrome WIPAC spotlights. 135mm in diameter, 60mm deep with covers. The lamp is nearly all forward of the mounting bracket making it great for fitting in front of mini grilles. Bulbs are H3 type 55 watts GLB453.

Reverse Light

Most early Minis did not come stock with a reverse light. This hanging light from Unipart will do the job! It can be conected direct to you gearbox by using

GAE191 switch on rod change gearboxes only.

3" high ...

Rear fog lamp bracket which attaches to the rear valance. Left hand drive only

If you have fitted the old type overiders and corner bars for the Retro look you will need to fit a modified bracket which is basically the right hand drive brac...

One pair of plastic covers to go over your original Rover spotlamps with Mini

winged motif(BMW trade mark)

This lamp unit comes without a bracket and will fit either side, if your bracket is okay. The unit only comes from Rover with bracket but costs £29-93 so we supply it less a bracket at £10-00 savings. If you require a bracket for the right hand it is...

One pair of plastic covers to go over your original Rover spotlamps with Cooper laurel motif.

Original spotlight bracket fitted to injection cars which mounted on the front panel valance and grille support panel giving it perfect rigidity so that the power of the lamp was not impaired. Many cheap aftermarket products do not fit as securely as...

see XFE10006 for lamp only, less bracket. This is the complete fog lamp plus a seperate bracket for L/H/D cars, or when owners want two fitted and this one fits on the left hand side.

Right hand (offside) outer bracket with reinforcements to stop lamps vibrating when 4 lamps are fitted-original fitment for MPI only-central 2 brackets are XBU10044.

Sold individually

Left hand outer bracket with reinforcements to stop lamps vibrating when 4 lamps are fitted-original fitment for MPI only.

Sold individually