The plastic chrome insert for fitting in the windscreen and backlight rubbers of all minis. You will require TOOL02 to fit these.

Most minis have a chrome coloured plastic insert in the windscreen rubber but

some owners in hot countries prefer this black one, which some claim is less prone to shrink or go off colour.

Heavy duty windscreen tool for fitting the chrome insert on windscreen rubbers. Ideal for people who use the tools more often.

Genuine Mini Spares quality product. For Mk1 cars use 14A8744

For Pickups you will need to cut and shorten either seal and make sure the join is at the bottom. The extrusion is the correct shape.

This seal is the best ...

Mini Spares own MK3 Window drop rail kit includes 1 x ALA5745 KIT with the 2 rails which are different front an rear (ALA5746 and 5747) plus 2 x 24A948 seals for the drop rails to hold the glass, this kit will do one complet...

Front and rear screen with chrome plastic insert.Saving nearly 15% on cost of individual partts

Genuine Mini Spares mouldings product as supplied to Rover.

These are the later door mouldings that prevent water running down the windows into the door causing rust and have the black platic ends fitted for later car safety regulations but ...

Genuine MK3 wind-up window upper slide up and down felt lined channel that fits into the R/H upper door frame. Left (PAM3077) and right (PAM3076) look identical but are mirror images.

pair of outer door seal mouldings and fixing clips

These are the original type without the black plastic ends which were introduced on later models for safety criteria. All outside moudings are interchangable but are sided.

All mini windscreen and backlights have this plastic moulding in the middle 99% of the time. Chrome in colour, this is on a 30metre roll for trade use.

PW5013 is the black equivalent.

Most minis have a chrome coloured plastic insert in the windscreen rubber but

some owners in hot countries prefer this black one, which some claim is less prone to shrink or go off colour.

Finishing clip in brightwork (chrome colour)for 24A1466MS locking strip in windscreen and backlight rubbers.

Draft excluder for sliding window doors as fitted to Mk1/2 Minis. Right hand side. Properly cut angles as original.Either crimp both ends with your fingers to make it stay on door glass or use a glue as per the factory on later vans.

Qty one...

Genuine Mini Spares mouldings product as supplied to Rover.

For wind up window cars 1970 on this is a set of inner and outer door brightwork mouldings with rubber seals attached to stop water running down the windows causing rust and to prev...