DOOR HANDLE KIT INC BOOT HANDLE FOR PRE 1966 MK1
24A1140KIT

($97.50) £97.50 exc vat

($117.00) £117.00 inc vat

In stockIn stock
Full Mk1 door handle set with 2 front door locking handles and boot handle with matching keys.

($97.50) £97.50 exc vat

($117.00) £117.00 inc vat

In stockIn stock

Recommended usage 1 x 24A1140KIT to fit one mini.

Recommended products

Seal for door handles MK1/2 and all sliding window exterior hinge cars.

also used on 14A7195 mk1 boot handlle used on mk1/mk2 and van/estate



is oval shaped



for boot / rear door use the hole at the rear ...

People also bought products

The felt gasket that sits between the door lock and door on external hinge doors. Material could be either black or white

MK3 Door & boot handle fitting kit, including original type screws, star washers and gaskets.

L/H outer chrome door handle for wind up window type doors 1970 on.

The R/H is CZH886 or a complete set (2 door and boot)with same key numbers is available as CZH1785. Alternatively a car set of barrels with same ke...

For wind up window type doors this is the mini saloon and clubman estate r/h

door lock mechanism mounted on the door.

For wind up window type doors this is the mini saloon and clubman estate l/h

door lock mechanism mounted on the door.

A complete set of 2 front door and one boot handle in chrome all with the same key numbers for wind up window door minis 1970on (keys included).

Door Handle Gasket's should also be replaced at same time, CZH1729 and [link]ALA579...

If your MKI or MKII suffers from terminal "door handle sag" it is quite possible that the inside door latch mechanisms are tired. A left hand drive car should have a locking latch on the right side (the driver's side key-locks with the handle). Right...

If your MKI or MKII suffers from terminal "door handle sag" it is quite possible that the inside door latch mechanisms are tired. A left hand drive car should have a locking latch on the right side (the driver's side key-locks with the handle). Right...

If your MKI or MKII suffers from terminal "door handle sag" it is quite possible that the inside door latch mechanisms are tired. A left hand drive car should have a locking latch on the right side (the driver's side key-locks with the handle). Right...

Mk III Chrome boot handle as fitted to all saloons from 1970 on. Includes 2 keys and paper gaskets.

If you want your door and bootlid to have new or matching keys this is the easy way. The standard set includes two barrels with matching keys. This is only suitable when you require a drivers door and boot handle to match on MK1/2 cars only. This fit...

If your MKI or MKII suffers from terminal "door handle sag" it is quite possible that the inside door latch mechanisms are tired. A left hand drive car should have a locking latch on the right side (the driver's side key-locks with the handle). Right...

Seal for door handles MK1/2 and all sliding window exterior hinge cars.

also used on 14A7195 mk1 boot handlle used on mk1/mk2 and van/estate



is oval shaped



for boot / rear door use the hole at the rear ...

The door striker plate on the B post holds the door shut, but the nylon guide block 14A6833 actually supports the weight when the door is closed. When one wears it typically takes the other with it, so replace both. Don't forget to order...

clip that sits on the activating lever on the bottom of the MK3 door handle itself.

New door handles CZH886 and CZH887 have this clip on already.

The actual boot lock mechanism that the boot handle fits into for all mini saloon bootlids.

The original T shape boot handle as fitted to the bootlid of MK1/2 plus vans and estates except the wooden variety....



uses the ADA3817 type of seal, hole will need cutting to suit the shaft of the handle

On sliding window type MK1/2 doors the door locks are held on by these 3 screws.

3/16"unf countersunk head 1" long.