BONNET HINGE L/H 1970-71 not clubman
CZH147

($1.00) £1.00 exc vat

($1.20) £1.20 inc vat

Out of stockOut of stock
fitted the first MK3 nini saloon from 1970-71 only

($1.00) £1.00 exc vat

($1.20) £1.20 inc vat

Out of stockOut of stock

Bonnet and Catches - Qty 1

People also bought products
BOOT SEAL CLIP KIT
14A6585KIT

Used on all MK1/2/3 bootlids there are 26 little holes drilled around the inner edge to hold the seal on and this kit contains the 26 clips. For single clips see 14A6585. Later cars 1988 on fitted a seal to the body only. (CKE10018)

($10.53) £10.53 exc vat

($12.64) £12.64 inc vat
CHECK ARM RUBBER GROMMET O/S 1970-1986
CZH4052

Moulded shape type right hand door stay grommet fitted until 1985 when it was replaced by a flat sponge type seal CGE10038/9.

($2.56) £2.56 exc vat

($3.07) £3.07 inc vat
WASHER BOTTLE BRACKET
CZG1496

Fitted to inner wing 1990 on, plus on a bracket on the rear wheel arch in boot area for all single points onwards. For earlier cars where fitted on the bulk head you may need to put a spacer behind to make removal of bottle easier.

Original ...

($5.76) £5.76 exc vat

($6.91) £6.91 inc vat
CHECK ARM RUBBER GROMMET N/S 1970-1986
CZH4053

Moulded shape type left hand door stay grommet fitted until 1985 when it was replaced by a flat sponge type seal CGE10038/9.

($2.56) £2.56 exc vat

($3.07) £3.07 inc vat
BONNET HINGE RH 1970-71 EXCEPT CLUBMAN
CZH146

fitted the first MK3 mini cars from 1970 to 1971 only

($3.00) £3.00 exc vat

($3.60) £3.60 inc vat
SEAM FINISHER R/H REAR SEAM NOT PRIMED
BMP124MS

Quality Aftermarket Body Seam Covers. These are the vertical ones that protect the 4 corners of your cars body seams. Both original and Mini Spares own aftermarket strips are available plus a stainless steel version for that special Mini.

($5.45) £5.45 exc vat

($6.54) £6.54 inc vat
RUBBER BLANKING PLUG FOR 13mm 1/2" HOLE
14A7031

Speedo cable grommet on 1990 on plus other holes.

($1.50) £1.50 exc vat

($1.80) £1.80 inc vat
SEAM MOULDING CLIP
GFK7515

Zinc plated mild steel clip for fixing vertical seam mouldings to the body.

($0.12) £0.12 exc vat

($0.14) £0.14 inc vat
DOOR CHECK STRAP CLEVIS PIN FOR RETAINING ADA5671
CLZ412

The pin that goes into the door stay check arm on the door itself on all minis with wind up type windows from 1970 to 2000.

($0.80) £0.80 exc vat

($0.96) £0.96 inc vat
DOOR CHECK STRAP MK III ONWARDS
ADA5671

Genuine door check strap for MK3 cars with wind up window doors.(use with retaining pin CLZ412 ). Beware! there are cheap copies on the market that are poor quality and when fitted to our cars did not function correctly.

($18.00) £18.00 exc vat

($21.60) £21.60 inc vat
GROMMET FOR BOOT FLOOR 8mm 5/16
13H1954

Rubber blanking plug 5/8"wide to fit boot floor hole 5/16".

($0.68) £0.68 exc vat

($0.82) £0.82 inc vat
HEATER HOSE GROMMET LARGE FOR HOSE THROUGH BODY
CLP6235

Grommet 2" at widest point-for the bulk head body elongated hole to protect the heater hoses on cars from 1989 with the in line heater valve and 5/8" heater hose. The 2 hoses go through the baulk head on the left hand side and fits a 32/33.5mm hole. ...

($2.61) £2.61 exc vat

($3.13) £3.13 inc vat