REVERSE LIGHT SWITCH REMOTE TYPE
GAE131

($25.00) £25.00 exc vat

($30.00) £30.00 inc vat

In stockIn stock
Genuine Mini Spares product, fits 3 and 4-synchro gearboxes except for rod change types which use GAE191. This switch replaces the plug on the front of the remote-shift transmission case. It is triggered internally by the shift linkage when reverse is selected. This must be fitted with an insulating fibre washer and a small plug 22G351 in the gearbox to activate the switch---the original washer 2K7914 is no longer available but 1B3664 can be used although the internal hole is slightly to large.

BEWARE OF SWITCHES AVAILABLE WITH WRONG THREAD AND PLUNGER SIZE-ALL USING PART NUMBER GAE131 THAT WERE MEANT TO REPLACE THIS PART,BUT OURS IS CORRECT.+

PS. if using the wrong shorter smaller diameter (7.7mm) 4 Synchro rod change detent spring the switch will jam up, so make sure you are using 3cm long 2A3647 spring (8.8mm wide). The smaller diameter spring pushes the switch detent plunger in all of the time causing seizure,closure or jamming of switch.

($25.00) £25.00 exc vat

($30.00) £30.00 inc vat

In stockIn stock

Recommended usage 1 x GAE131 to fit one mini.
Gear Change Up to 1972 Not Rod Change - Qty 1

Recommended products
WASHER FOR ADP210 PLUG
1B3664

Universal fibre washer mainly used on inlet manifold blanking plugs ADP210.

($0.25) £0.25 exc vat

($0.30) £0.30 inc vat
REVERSE SWITCH PLUNGER FOR GAE131
22G351

Plunger dowel for use with GAE131 reverse light switch on early gearboxes pre rod change.A fibre isolation washer must be fitted for switch to work which is available as 1B3664

($4.20) £4.20 exc vat

($5.04) £5.04 inc vat
People also bought products
WIPER SWITCH 2 SPEED
BHA4786

Wiper Swithch MK1/2/EARLY MK3 blade type switch for using to convert to 2 speed wipers when current 2 speed wiper motor is used.

($15.00) £15.00 exc vat

($18.00) £18.00 inc vat
HEADLIGHT TOGGLE SWITCH WILL FIT 1976-96 MODELS
AAU4562

Originally fitted as standard to the MGB and MGB GT, but has the same plug configuration as the 76 on Mini's so can be used in place of the stabdard rocker switch

If you also have an issue with the plug, a new plug and wiring repair is avail...

($12.00) £12.00 exc vat

($14.40) £14.40 inc vat
REPAIR LOOM AND PLUG FOR HEADLAMP SWITCH 1976 ON
PM07

Repair loom and plug for all post 1976 headlamp switches.See PM08 for headlamp switch with plug and correct wires colours for loom repair

($6.00) £6.00 exc vat

($7.20) £7.20 inc vat
SWITCH FOR COURTESY LIGHT
YUE100470

Courtesy switch for MPI minis from 1996 when the wiring was changed from bullet type to spade connection. This is the switch that fitted into the A post to turn the interior light on and off, the earlier switch is no longer available so if you have a...

($8.64) £8.64 exc vat

($10.37) £10.37 inc vat
STARTER SOLENOID WITH START BUTTON FUNCTION
BMK1727

With an integral push start button built in the solenoid as originally fitted to early minis. The activation of the starter motor starts with the key (or push button in the early cars), but the most important function is carried out by the solenoid....

($25.60) £25.60 exc vat

($30.72) £30.72 inc vat
LOCKNUT (GAE191) 3/8"unc
22A1613

Special flat 3/8" UNC nut for the reverse light switch GAE191.

($0.46) £0.46 exc vat

($0.55) £0.55 inc vat
FLOOR STARTER SWITCH (SRB312)
17H5260

The floor starter button switch on the early Mini really adds a mark of distinction; it is a classic item that properly dates the vintage of the car. BUT if it becomes intermittent it’s a real pain…you don't even have a battery cable in the engine co...

($31.88) £31.88 exc vat

($38.26) £38.26 inc vat
FRONT FOG LIGHT SWITCH
YUF101670PMA

Rocker switch for all models with front fog lights fitted as standard. Please note the lens colour is now green. 6 pins on the back for plastic loom connector.

($8.00) £8.00 exc vat

($9.60) £9.60 inc vat
REAR FOG LIGHT SWITCH LATE - ADU4791
YUF101690

Rear fog lamp switch with the orange illumination segment for all vehicles fitted with production fog lamps as standard. 3.1cm tall from 1976 on.

($9.80) £9.80 exc vat

($11.76) £11.76 inc vat
INDICATOR FLASHER UNIT MK1
GFU2103

Correct 42watt 12 volt Indicator flasher unit for all MK1 minis easily identified by the locating tag on its end it was the longest/largest flasher ever fitted to the mini.





please note. this unit only works with NEGATIVE ...

($5.24) £5.24 exc vat

($6.29) £6.29 inc vat
DIP SWITCH FOR HEADLAMPS ON EARLY CARS (FLOOR)
RTC432A

If you have a floor mounted type of headlamp dip switch then this is the item you require.Mk1 Mini--sprite/midget MGB67-70,morris Minor.landrover,bentley, rolls and many more.

($11.00) £11.00 exc vat

($13.20) £13.20 inc vat
INDICATOR LENS. END OF STALK. MK1 ONLY
47H5200

Mk1 Mini Indicator stalk green lens. Also fitted to other BMC variants such as Morris Minor. See GLB280 for the replacement bulb

($1.30) £1.30 exc vat

($1.56) £1.56 inc vat
IGNITION BARREL MK I & II
24G1345

IGNITION BARREL TO FIT 13H337 SWITCH. MK1/2/EARLY MK3. ONE BARREL,TWO KEYS

($7.40) £7.40 exc vat

($8.88) £8.88 inc vat
BRAKE LIGHT SWITCH SINGLE LINE TO 1976
C16062A

Brake light switch for pre 1976 minis with single line brake systems. Fits into banjo bolt (7H7995) located at O/S front brake hose. This switch has a tapered thread. Made by a UK company who suplied parts to Unipart.

For minis ...

($5.10) £5.10 exc vat

($6.12) £6.12 inc vat
MK1 HORN PUSH ASSEMBLY WITH AUSTIN CENTRE MOTIF
27H6943

Horn push assembly for the Mk1 Austin Mini, Mk1 Austin Mini Cooper and Mk1 Austin Mini Cooper S.

For Morris cars, see 27H6944. This horn push assembly can also be supplied without a centre emblem, see 27H6945

($54.00) £54.00 exc vat

($64.80) £64.80 inc vat
FLASHER AND HAZARD UNIT.BLACK PLASTIC TYPE INJECTI...
GFU2208

($11.14) £11.14 exc vat

($13.37) £13.37 inc vat
IGNITION SWITCH DASH MOUNTED
13H337

MK1/2/EARLY MK3. 3 position spring loaded type. Comes with barrel.

For barrel only use part number 24G1345.

($8.56) £8.56 exc vat

($10.27) £10.27 inc vat
LIGHT SWITCH Mk1 Mk2 & EARLY Mk3
1H9077

Headlamp switch fits MK1/2/ earlyY MK3, Toggle type also known as bat handle type, 3 POSITION. BLADE CONNECTIONS.

($8.67) £8.67 exc vat

($10.40) £10.40 inc vat
REVERSE LIGHT SWITCH ROD CHANGE
GAE191

Used on Rod change gearboxes and fits on the side of the gearlever alloy housing, the locknut is to prevent the switch being screwed in to far. Use 22A1613 locknut.

($6.87) £6.87 exc vat

($8.24) £8.24 inc vat
WIPER SWITCH Mk1 Mk2 & Early Mk3 (31780)
2A9129

WIPER SWITCH,FITS MK1/2/EARLY MK3.TOGGLE TYPE.2 POSITION.

($10.88) £10.88 exc vat

($13.06) £13.06 inc vat