Mk1 AUSTIN COOPER INTERNAL RELEASE GRILLE PACKAGE
24A199KIT

£198.62 exc vat

£238.34 inc vat

In stockIn stock
Retro grille to the Austin Mini Cooper S MK1 design. Has a full top slat which means the fitting of an internal bonnet lock kit.

Kit includes grille, surround, end whisher mouldings and fixing clips.

£198.62 exc vat

£238.34 inc vat

In stockIn stock

Recommended usage 1 x 24A199KIT to fit one mini.
MK1 Grilles - Qty 1

Alternative products

Morris Cooper full slat grille is with surround in chrome over brass to give a little longer life service. Made to fit the later genuine front panels better than the original this kit will require that you have an internal bonnet lock. This is everyb...

Retro Grille to the Austin Mini Cooper and S MK1 design has a recess top slat which allows opening of bonnet as per originals. If you require a full top slat order 24A199KIT which requires the fitting of an internal bonnet lock kit.
...

Kit contained products

Screw for holding front indicator lamp with AK606021 clip in bodywork pre 1986.

Also used to hold on MK1 grille moustache.

Fits in shaft of MK1/2 door handles to retain them in the locks.

Moustache whisker clip for MK 1 grille. The end pieces of trim on the MK1 grille moulding known as the moustache. If your MKI whiskers have been gone so long that the clips and rivets are missing. Usually 3 per side fitted, clips sold individually.

Whiskers were so rare for so long, many of us forgot that our MKI Minis ever had them. If you still have the empty clips, you just need the whiskers, if you need clips they're ADA3583. The rivets to hold the clips are RA608076

Whiskers were so rare for so long, many of us forgot that our MKI Minis ever had them. If you still have the empty clips, you just need the whiskers, if you need clips they're ADA3583. The rivets to hold the clips are RA608076

MkI "moustache"(mustache in USA) chrome surround for the MkI grille.

This item is in deep chrome on brass as per the original 1960s type to help prevent rusting. It has now been modified to fit with our grilles to all genuine front panels ...

Retro Grille for the Austin Mini Cooper S. This grille has a full top slat so an internal bonnet release kit must be fitted

This rivet was used to hold the plastic chrome seam moulding trim on minis by the factory (one either end) and also holds the clip to the body for securing the MK1 grille moustache end mouldings (the clip is ADA3583).

People also bought products

Grille Button

This is a single chrome button only if you need a spare for MS99 set

See MS99 set for part desription also

Austin Mk1 grille with half top slat for external bonnet release. It is complete with chrome over brass grille surround as per original material and

modified to fit all later genuine panels. Kit includes grille,surround, end whisher moulding...

Slat type front grille section for mini van which will need trimming before welding into recess of either an original damaged front panel or a saloon version.

It is sold as a grille size panel and can be fitted as such when painted with [li...

This style of grille was introduced when the MKII Mini was first shown in 1968.

Since then the same basic grille can be fitted to all later models of the Mini

but this has no dished top slat to allow opening of the bonnet. Therefor...

Grille surround set, bonnet moulding and 2 side pieces plus chrome plastic seating strips and screws for all Mk2 grilles from 1968 to the last production models in 2000.

This kit includes the special shaped chrome plastic seating pieces for...

This kit includes the latest Cooper full slat grille ALA6669 and 3 surrounds with the screws and fittings. An internal bonnet release is required with this kit. The bonnet lock is available as GS130273.

The 5 No6 1/...

Retro Grille to the Austin Mini Cooper and S MK1 design has a recess top slat which allows opening of bonnet as per originals. If you require a full top slat order 24A199KIT which requires the fitting of an internal bonnet lock kit.
...

This kit includes the Cooper S grille and 3 surrounds with the screws and the mouldings behind the grille surrounds ---see GRILLE05 for later full slat grille when using internal cable type bonnet release.

The 5 No6 1/2" long sc...

Grille Buttons

Take it easy, make it easy, do it easy! Upgrade your Mini regardless of year for "ease" of removal of your grille!

The solution for many years has been these simple "Grille Buttons". Now in colour!

Morris Cooper and S grille. The wide slats are made in automotive type 430 stainless steel which means any stains created where it would attach to ordinary metal can be polished out. If you fit an internal bonnet locking kit there is a grille [link]2...

Retro Grille for the Austin Mini Cooper S. This grille has a full top slat so an internal bonnet release kit must be fitted

Grille Buttons.

Take it easy, make it easy, do it easy. Upgrade your Mini regardless of year for "ease" of removal of your grille.

MkI "moustache"(mustache in USA) chrome surround for the MkI grille.

This item is in deep chrome on brass as per the original 1960s type to help prevent rusting. It has now been modified to fit with our grilles to all genuine front panels ...

genuine Mini Spares item as supplied to Rover and not to be confused with the poor quality ill-fitting aftermarket type available which albeit,are only slightly cheaper to buy. This Minispares top quality item is a very needed finishing touch to the ...

Genuine Mini spares item as supplied to Rover and not to be confused with the poor quality ill-fitting aftermarket type available which albeit,are only slightly cheaper to buy. This Minispares top quality item is a very needed finishing touch to the ...

Whiskers were so rare for so long, many of us forgot that our MKI Minis ever had them. If you still have the empty clips, you just need the whiskers, if you need clips they're ADA3583. The rivets to hold the clips are RA608076

Whiskers were so rare for so long, many of us forgot that our MKI Minis ever had them. If you still have the empty clips, you just need the whiskers, if you need clips they're ADA3583. The rivets to hold the clips are RA608076

This is a complete moustache kit to fit all MK1 grilles to any genuine rover front panels. The fixing lugs on the 14A7781retro surround are deeper to fit into the recess formed on front panels. The bonnet moulding and its fitting platfor...