BLEED NIPPLE 3/8" UNF THREAD
3H2428

£1.20 exc vat

£1.44 inc vat

In stockIn stock
Suitable for standard 8.4" / 7.5" /7" brake calipers. Also used for front wheel cylinders on twin leading shoe type drum brake cars. This is where you have 2 cylinders per hub as opposed to the early single leading type which had one cylinder only per hub. Not suitable for Metro 4-pot calipers which use metric nipples (see BAU1790).

Also used for clutch slave cylinders.

£1.20 exc vat

£1.44 inc vat

In stockIn stock

Recommended usage 2 x 3H2428 to fit one mini.
Diaphragm Clutch & Slave Cylinder - 1964 ON - Qty 1
Verto Clutch & Slave Cylinder 1982 ON - Qty 1
Front Brakes ( Disc Type ) - Qty 2
Front drum Brakes DRY 1959-1964 ALL HYDROLAST - Qty 2
Rear Brakes Single Line & Tandem - Qty 2
Clutch cylinders and flywheel case - Qty 1
Front Brakes - Qty 2

People also bought products

Cooper S 7.5" complete brake disc kit, except for disc shields, with Mini Spares own cast standard calipers. If you want or have 10" wheels this is the kit to convert from drum brakes to discs brakes.

This kit includes every nut bolt and co...

12" wheel to 10" wheel running gear conversion kit. Less wheels.

This kit will convert your 8.4 disc set up to the Cooper S 7.5 discs to allow fitment of 10" wheels, kit includes discs, calipers, kevlar pads with split pins and drive flanges...

Genuine Mini Spares version of the L/H AP caliper as produced by us years ago when not available from AP. Whether you are upgrading from the smaller 997/998 discs to the larger 'S' brakes or simply restoring a Cooper S, you'll appreciate the value o...

Genuine Mini Spares version of the R/H AP caliper as produced by us years ago when not available from AP. Whether you are upgrading from the smaller 997/998 discs to the larger 'S' brakes or simply restoring a Cooper S, you'll appreciate the value of...

7.5" Vented brake disc, suitable for use with our vented alloy 4 pot calipers (C-AJJ4023 together with C-AJJ4021). These are sold individually but should always be replaced in pairs. These are in fact 8.4" vented discs machined down

to 7.5" ...

A pair of 7.5" brake discs and one set of Kevlar road brake pads.

Genuine Mini Spares R/H caliper for 8.4" disc set ups remanufactured exclusively for Minispares. Lots of alternatives on the market but AP no longer make the originals but as their largest agent for Mini these are our own and fully tested.

C...

Genuine mini Spares L/H caliper for 8.4" disc set ups remanufactured exclusively for Minispares. Lots of alternatives on the market but AP no longer make the originals but as their largest agent for Mini these are our own and fully tested.Caliper fit...

Pair of vented discs and Mintex GBP258AF pads,one of our best selling brake disc kits. Includes discs[link](GBD496)/link] which are a bargain.Only for carss fitted with vented discs already.

This is not a direct replacement kit ...

PRICED INDIVIDUALLY per disc but should always be fittted in pairs for safety and efficiency..

THERE IS AN ALTERNATIVE GROOVED AND DRILLED PAIR OF DISCS SOLD AS C-GBD496.

Non genuine pair of L/H disc shield covers for the 8.4" disc size. Fitted as standard from 1984 to 2000. Non genuine but all that is available. It comes complete with the little locating bracket. If you require just the bracket, order it separately ...

UK made 8.4" brake disc. Priced individually but should always be replaced in pairs for safety and braking efficiency. These are the best quality available of the low priced brake discs on the market and suitable for all standard road use.Beware of t...

If your rear brake drums have 1" built in spacers such as all Cooper S and any post 1984 minis, these are the longer drum retaining screws, 2 required per drum and sold individually.

A pair of L/H shield covers for 7.5" disc as fitted to Cooper S

The little locating bracket to the hub is available seperate as BTA1209

Pair of 8.4" non vented discs and GBP281 Mintex road pads.

The screw that holds the drum on the hub. Earlier hubs had two screws, many replacements have only one, all that’s needed.

Genuine AP R/H caliper. Whether you are upgrading from the smaller 997/998 discs to the larger 'S' brakes or simply restoring a Cooper S, you'll appreciate the value of these brand new brake calipers. See also 27H4656MS for our own Mini ...

8.4" diameter as used standard on all late model Minis with 12 or 13 inch wheels. Our premium quality item. See GBD90806MS for a cheaper option.

Sold individually, but should be replaced as pairs.

A pair of r/h disc shield covers for 7.5"wide brake discs as per cooper S

If you require the little bracket order seperate as BTA1208

This is the small oil seal used on all Mini Spares 4 pot caliper and also the spacers fitted between Minispares 4 pot alloy when vented discs are fitted. They are supplied in the C-AJJ4021 kit to fit to our calipers when vented discs are...