£75.00 exc vat
£90.00 inc vat
In stock
£75.00 exc vat
£90.00 inc vat
In stockRecommended usage 1 x ARA2769 to fit one mini.
Mini Spares own exclusive designed Lightweight aluminium type high efficiency radiator with good fitment, rigidity and appearance, unlike others on the market with 4 large ugly fixing nuts on each side, or where the header tank is 10mm wider that fou...
2 per engine-Longer lasting poly type radiator grommet in Yellow for 1974 on.
These were first used on the one piece cowling from 1974 on. These fit on the lower retaining bolt and 2 are required but sold singly.
"4-Core" Radiator the only real "4-core" radiator available today is supplied by MiniSpares of London with a drain hole and plug- this hole also accepts the sender unit as used on later cars from 1991 which is available as C-ARA4446 kit....
Top and bottom rad cowling for the mini Cooper and S to 1971,
plus a few 1275GT to 1974.
The fixed bracket on the bottom cowl is moved further away from the engine towards the radiator. This also uses a bent rad bracket [link]12A293...
Standard Mini radiator with 3 offset tubes in the core. Metric thread fixings.
Flanged metric thread bolts are available as FS106107separately.
See also, alloy radiator in same shape but 2x18mm tubes as an alternative
Minispares own UK manufactured product with original shape mini header tank, now with drain plug in lower tank which doubles up to also accept the screw in type sensor for later cars. It has about 20 fins/ gills per inch with 2 tubes in the core and ...
Known as"4-Core" Radiator, because it has 4 offset tubes in the core it is the only real "4-core" radiator available today manufactured in the UK since 1978 for MiniSpares with original top header tank shape. Our design has been proven to be the best...
There are two of these bolts on hydrolastic front subframe towers to fix in place to the bulkhead. Fit dry suspension pre 1976 see 21A90. This bolt also holds the lower radiator bracket to the alloy casting on the gearbox when a 2 piece ...
Metal type expansion or rad cap with no pressure spring, commonly used on race prepared cars and all Austin -Morros 1100/1200 derivatives plus Aussie Mokes.
The left side inner fender of the MKI/2/3 pre 1975 Mini should have a metal cowling to focus the air from the radiator to the wheel well. The almost square cowling is spot welded to the inner fender and has the tabs on it that in turn hold the rubbe...
this lower radiator bracket originated when the one piece rad cowling was introduced
These 1/4"UNF 3/8" long bolts were used on the one piece cowling from 1974 on. Many people have punctured their radiator by using too long a screw. Also used as the small timing cover bolt on A series engines. Also the small bolt on the front wheel c...
This sleeve is used with the 11G227 grommet on all one piece radiator surround top brackets.
Fitting kit comprising of studs, nuts, plain washers, spring washers and a gasket
3 YEAR GUARANTEE-UK made.Large impeller higher capacity water pump with top quality die cast body . Mini Spares procured product as the original superb Rover Airtex tooling has been scrapped.
Fitted with a PPS, glass filled plastic impeller...
3 YEAR GUARANTEE-UK made. Large impeller higher capacity water pump with a high quality die cast body. A Mini Spares procured product as the original superb Rover Airtex tooling has been scrapped.
Fitted with a PPS, glass filled plastic impe...
Designed to reduce the horsepower drain and slow down the water moving through the radiator to allow it time to cool, its very important for the higher RPMs we run today. This oversize pulley is 4.2" diameter, earlier cars used a 3.875" wide pulley. ...
Lightweight alloy Dynamo/Alternator pulley 75mm wide 2.95" and where belt sits 48.895mm (1.925")wide. Fits all Dynamos and 15mm Diameter shaft 16ACR Alternators.
Owing to the cost many use 12A1772 which is 79mm 3.1" wide - [lin...
Radiator hose kit for all spi Minis. This kit has top and bottom radiator hoses and 2 lengths of heater hoses…all in shiney black Silicone that should last forever and not degrade with heat, time and environment. This kit is ideal for both the racer ...
Radiator hose kit for all pre 1989 1275cc Minis except clubman which has a longer top hose. the kit has top and bottom radiator hoses and two lengths of heater hoses(1m and 1.2m long)…all in shiney black Silicone. These should last forever and not de...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.