£68.09 exc vat
£81.71 inc vat
In stock
£68.09 exc vat
£81.71 inc vat
In stockRecommended usage 5 x C-21A1981 to fit one mini.
If your wheels are using a tapered seat style wheel nut you must consider this latest safety option! The original stock nut has a very small area of contact to absorb all the loads of cornering, etc. Our special "wide seat" nuts almost double the con...
Not much choice on 13" wheels now bridgestone have discontinued the Mini size but don't worry as this was everybodies favourite for alround motoring. Also see TYRE25 for the AO48R type from Yokohama.
EU label informat...
There's not much choice on 13" tyres now bridgestone have discontinued the Mini size but dont worry as AO48R was another favourite for track days. For the dry really but not great for wear. Also see TYRE18 for the A539 type from Yokohama...
Deep polished dish wheel with 68mm centre cap hole and takes normal CN5 type nuts
This is the ultimate in a 12" alloy wheel, the original tech del Minilite look is the standard of the Mini car business. These look alike wheels were made from the original design of the wheels as used by Special Tuning Abingdon and the quality is gr...
There's not much choice on 13" tyres now bridgestone have discontinued the Mini size but dont worry as AO48R was another favourite for track days. For the dry really but not great for wear. Also see TYRE18 for the A539 type from Yokohama...
Not much choice on 13" wheels now bridgestone have discontinued the Mini size but don't worry as this was everybodies favourite for alround motoring. Also see TYRE25 for the AO48R type from Yokohama.
EU label informat...
Classic Mini trademark badge for classic mini winged badge about 42mm wide with the correct dome shape. This is a replacement for DTC100680MNH cap as well as
DAH100590MMM.
Vehicle centre caps and winged bonnet...
Longest one piece stud available, 78mm long with 27mm thread. Can be used on later wider brake drum but with 3/4"(19mm)spacers only. Available as a kit as CW17. The shank length from under the bolt head is 78mm with 30mm thread.
Over the years Minilite wheels have been made in different widths and offsets, they all took .625"(15.7mm) diameter lug nuts, but the lengths vary. They are sold "each". This one has a shank length of 19mm long and will only fit the 5x10 minilite. T...
50mm shank length from under head of stud with 26mm long thread. Used in many spacer kits (our CW1).
Mini Cooper Laurel for the winged bonnet badges fitted from 1990 onwards DAH10036
These are also suitable for the centre caps of the Rover alloy wheels,
For the Monte Carlo, Cooper 35 and Paul Smith...
Many aftermarket wheels, when combined with wide tyres, in certain applications will require the use of spacers to avoid tyre rub. Spacers are sold by the pair, and include longer 21A2064L wheel studs.
If your wheels are using a tapered seat style wheel nut you must consider this latest safety option! The original stock nut has a very small area of contact to absorb all the loads of cornering, etc. Our special "wide seat" nuts almost double the con...
Many aftermarket wheels, when combined with wide tyres, in certain applications will require the use of spacers to avoid tyre rub on the inside. Spacers are sold by the pair, and include 8 longer wheel studs. These are the largest spacers that will ...
This is the same length as the Sportspac 6x13 rear wheel stud but has less corser splines for fitting semi worn holes. 58mm long shank from under bolt head with 19mm thread. Next size up is ENJO-1040 at 78mm long. This bolt is used in bo...
Many aftermarket wheels, when combined with wide tyres, in certain applications will require the use of spacers to avoid tyre rub. Spacers are sold by the pair and include longer wheel studs. Spare studs are ENJO-1039.
If you ar...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.