£1.55 exc vat
£1.86 inc vat
In stock
£1.55 exc vat
£1.86 inc vat
In stockRecommended usage 16 x CN5 to fit one mini.
These chrome wheel nuts have the 60 degree fitting angle on them which was introduced as standard on original production car wheels from 1984 on.
This is the ultimate in a 12" wheel-the Minilife look is the standard for the Mini car. These top quality look-alike wheels were made from some of the original designs and look great. The 5" wide design works best with small flares and a set of 165/6...
Kit comprises Four 5x12 Minispares ST Wheels, and four 165/60/12 falken tyres. Please note these wheels are silver in colour and tyres are not fitted. ST logo is the old Special Tuning Abingdon logo
Solid version of NAM9075 chrome plated without the troublesome stainless steel cover that gets destroyed by air tools and 12 point sockets. This uses 17mm socket.
Stainless steel wheel nut for our 10" rose petal alloy wheels, this is the shorter version needed when using the wheels without a spacer, includes stainless steel washer. 25MM long.
Chrome wheel nut for all original Mamba and Revolution wheels except 13".
Overall length is 48mm
Sleeve length is 32mm
Sleeve diameter is 13.8mm
The washer is 2.3mm thick and outside diameter is 24mm
The original stock nut has a very small area of contact to absorb all the loads of cornering, etc. Our special "wide seat" nuts almost double the contact area! The first designs (Bugeye) use a flatter seat than the more common "Rostyle" type. Chrome ...
Stainless steel sleeve nut with tapered washer.
5/8" SHANK DIAMETER and 16mm long shaft. Sold individually as fitted to our Special Tuning wheel range where applicable.
The best reason for buying our wheels is that spare ...
These fit our Minispares range of 4.5x10" and 5x12 ST wheels that have sleeve type nut and chamfered washer with the exception being C-21A1021 and WHEEL1000/1001. These also fit most of the old original Minilites from Tech Del before the...
The original mini wheel nut with a round seating was fitted from 1959 until 1984 when they changed to a 60 Degree straight seating wall. This later nut was 113087. 10" wheels with plastic hub caps used a strange looking nut to hold the c...
Wheel bolt for Minilites.
The Minilite company has gone through some very difficult times over the last number of years and all the changes of ownership have caused severe supply problems. These are 15.75mm wide 38mm long shank with overa...
Over the years Minilite wheels have been made in different widths and offsets, they all took .625"(15.7mm) diameter lug nuts, but the lengths vary. They are sold "each". This one has a shank length of 19mm long and will only fit the 5x10 minilite. T...
Wheel nut for the mini 20th birthday special edition with 10" wheels. Shank length is 8.5mm, shank diameter 15mm.
The Minilite company has gone through some very difficult times over the last number of years and all the changes of ownership have caused severe supply problems.
Lug nuts. 15.75mm wide shank 21.5mm long shank length and overall length of...
Minispares own stainless steel wheel nut and zinc plated washer for some Mamba and Revolution wheels except 13".
Shank length under the flat washer is 28mm. Shank diameter is 13.9mm.
Wheel Nut for Genuine Rover Cooper 8 spoke and MPI Sportspack wheel. Price is for one wheel nut not a set as pictured. You must use a 6 sided 11/16" socket and not use air tools or a multi 12 point socket to avoid damaging the wheel nut. Original nut...
These chrome wheel nuts have the 60 degree fitting angle on them which was introduced as standard on original production car wheels from 1984 on.
When the 12" steel wheel was introduced as standard in 1984 they changed the wheel nut seating angle to 60 degrees.
Chrome Lug nut.
Fit stock 10" & 12" wheels. Also fits Minator and other Mag wheels that take a radius seat type nut.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.