WHEEL LOCKNUTS FOR MINISPARES AND ORIGINAL MINILIT...
LOCKNUT3

£17.93 exc vat

£21.52 inc vat

Out of stockOut of stock
These fit our Minispares range of 4.5x10" and 5x12 ST wheels that have sleeve type nut and chamfered washer with the exception being C-21A1021 and WHEEL1000/1001. These also fit most of the old original Minilites from Tech Del before they went out of production pre 1980. Note however these do not fit 6x10 size wheels. The ST range of wheels were formerly also known as MINILIFE

£17.93 exc vat

£21.52 inc vat

Out of stockOut of stock

People also bought products

Stainless steel sleeve nut with tapered washer.



5/8" SHANK DIAMETER and 16mm long shaft. Sold individually as fitted to our Special Tuning wheel range where applicable.

The best reason for buying our wheels is that spare ...

The original mini wheel nut with a round seating was fitted from 1959 until 1984 when they changed to a 60 Degree straight seating wall. This later nut was 113087. 10" wheels with plastic hub caps used a strange looking nut to hold the c...

Over the years Minilite wheels have been made in different widths and offsets, they all took .625"(15.7mm) diameter lug nuts, but the lengths vary. They are sold "each". This one has a shank length of 19mm long and will only fit the 5x10 minilite. T...

Wheel Nut for Genuine Rover Cooper 8 spoke and MPI Sportspack wheel. Price is for one wheel nut not a set as pictured. You must use a 6 sided 11/16" socket and not a multi sided socket to avoid damaging the wheel nut. Original nuts from the factory u...

If your wheels are using a tapered seat style wheel nut you must consider this latest safety option! The original stock nut has a very small area of contact to absorb all the loads of cornering, etc. Our special "wide seat" nuts almost double the con...

For wheels with 60 degree radius angle seats CN2/CN5 or 113087 as fitted from 1984 on 12" steel wheels by Rover or any alloy with same seating including our minilife 5x12 WHL1021.

This locknut set fits any Rover Cooper 8 spoke alloy wheel that was fitted with the NAM9075 s/steel covered wheel nut or the standard AJM1139 non covered variety which were both 11/16"in size. Price is for one set.

Cover those ugly tire valve stems with alloy caps in your choice of colors; MTC3=silver, MTC4=gold MTC5=red, MTC6=blue.

Many aftermarket wheels, when combined with wide tires, in certain applications will require the use of spacers to avoid tire rub on the inside. Spacers are sold by the pair, and include longer (2.25") wheel ENJO1039 studs. Cars fitted with spacered ...

This is the correct length for all minis using the rear spacered type drum which was fitted to all Cooper "S" 1275GT and every mini from 1984 to 1996 except the ERA Turbo and Sportspac cars which had 13" wheels. Stud shank length from under head of b...

Cover those ugly tire valve stems with alloy caps in your choice of colors; MTC3=silver, MTC4=gold MTC5=red, MTC6=blue.

last few-Original minilife black on white 49.7mm(50mm) wide sticker for the old centre caps which have now been changed to C-21A1962 alloy cap with ST decal size of 50mm.For "ST" stick on badge see[linkSTICKER25[/link]

The new p...

Original minilife wheels had black on white stickers for the alloy cap with decal size of 49.7mm but this is the new ST logo plastic type cap sticker which is 55mm. The plastic cap number is C-21A1962.

This was the old Leyland S...

Many aftermarket wheels, when combined with wide tyres, in certain applications will require the use of spacers to avoid tyre rub. Spacers are sold by the pair, and include longer 21A2064L wheel studs.

Often used by by racers because it has a true 11/16" hex head whereas the later

type NAM9075 has a s/steel cover making it an odd size which is why they often get damaged. You must use a 6 sided socket and not a multi sided 11/...

52mm centre cap for 12" and 13" alloy genuine Rover wheels, this has the Cooper Laurel design. Sold individually.

Vehicle centre caps and winged bonnet badge emblems chart from 1990 on

Black plastic cap Sticker 50mm Model

This is the same length as the Sportspac 6x13 rear wheel stud but has less corser splines for fitting semi worn holes. 58mm long shank from under bolt head with 19mm thread. Next size up is ENJO-1040 at 78mm long. This bolt is used in bo...

This is the same length as ENJO1039 but has a shorter thread length.

Fitted as standard on Sportspack minis.

Fitted to the anthracite 4.5x12"wheels on the Monte Carlo and MINI 35SE version only- the plain black plastic cap is NAM9105PMD--this is a white version of DTC100690MNH.

This part is supplied with the white sticker...

For 4.5x10" and 5x10" Genuine Minilites from 1990.

The Minilite company has gone through some very difficult times over the last number of years and all the changes of ownership have resulted in new tooling but these fit the new Minilite r...