£3.36 exc vat
£4.03 inc vat
In stock
£3.36 exc vat
£4.03 inc vat
In stockRecommended usage 1 x MTC3 to fit one mini.
Cover those ugly tire valve stems with alloy caps in your choice of colors; MTC3=silver, MTC4=gold MTC5=red, MTC6=blue.
Cover those ugly tire valve stems with alloy caps in your choice of colors; MTC3=silver, MTC4=gold MTC5=red, MTC6=blue.
Plain spun ally centre cap for the original 10" steel wella wheel. 63mm rear fitting cap, 45MM DEEP with logo face of 45mm.
rear fitting 69mm spun alloy cap for 12"wella steel wheels only has a logo face of 45mm-less wella sticker--wella stickers are now obsolete
For the latest 12" Revolution whels with a 67mm centre cap introduced on 2004
Cover those ugly tire valve stems with alloy caps in your choice of colors; MTC3=silver, MTC4=gold MTC5=red, MTC6=blue.
Cover those ugly tire valve stems with alloy caps in your choice of colors; MTC3=silver, MTC4=gold MTC5=red, MTC6=blue.
52mm centre cap for 12" and 13" alloy genuine Rover wheels, this has the Cooper Laurel design. Sold individually.
Vehicle centre caps and winged bonnet badge emblems chart from 1990 on
Black plastic cap Sticker 50mm Model
Plain black less logo fits the 12" and 13" Cooper 8 spoke alloys but this was used on the 12" version and fits the genuine 52mm centre. Also fits the 12" pepperpot wheel RRC109630MNH.
Sold individually
Vehicle centre ca...
Centre cap for 6" X10" 6x13,and 5x12 Genuine Minilites manufactured after 1990.
The Minilite company has gone through some very difficult times over the last number of years and all the changes of ownership resulted in new tooling and desi...
Green centre cap for 13" sportspack wheels with MINI word but interchanges with other genuine 12" and 13" Rover alloy wheel caps. Sold individually.
Vehicle centre caps and winged bonnet badge emblems chart from 1990 on
Black plasti...
Fitted to the anthracite 4.5x12"wheels on the Monte Carlo and MINI 35SE version only- the plain black plastic cap is NAM9105PMD--this is a white version of DTC100690MNH.
This part is supplied with the white sticker...
Solid version of NAM9075 chrome plated without the troublesome stainless steel cover that gets destroyed by air tools and 12 point sockets. This uses 17mm socket.
white sticker for fitting black centre caps which then make this look bolder, as fitted to Monte Carlo and Mini 35SE.
Vehicle centre caps and winged bonnet badge emblems chart from 1990 on
Black plastic cap Sticker 50mm Model
...
Chrome wheel nut for all original Mamba and Revolution wheels except 13".
Overall length is 48mm
Sleeve length is 32mm
Sleeve diameter is 13.8mm
The washer is 2.3mm thick and outside diameter is 24mm
55mm wide chrome centre cap with 40mm face with leyland "ST" logo centre as supplied on wheels This fits the ST Minispares Minator 5x10 and 6x10 8 spoke wheel, which have a flat fronted outer rim as per all the ST designs since 25/09/04 but now has a...
For the latest 10" Revolution wheels with a 61mm centre cap introduced on 2004
Many aftermarket wheels, when combined with wide tyres, will require the use of spacers to avoid tyre rub. Spacers are sold by the pair, these come without studs because they're so skinny the original studs should work. 3/16" PER WHEEL.
The original stock nut has a very small area of contact to absorb all the loads of cornering, etc. Our special "wide seat" nuts almost double the contact area! The first designs (Bugeye) use a flatter seat than the more common "Rostyle" type. Chrome ...
Stainless steel sleeve nut with tapered washer.
5/8" SHANK DIAMETER and 16mm long shaft. Sold individually as fitted to our Special Tuning wheel range where applicable.
The best reason for buying our wheels is that spare ...
These fit our Minispares range of 4.5x10" and 5x12 ST wheels that have sleeve type nut and chamfered washer with the exception being C-21A1021 and WHEEL1000/1001. These also fit most of the old original Minilites from Tech Del before the...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.