£3.75 exc vat
£4.50 inc vat
Out of stock
£3.75 exc vat
£4.50 inc vat
Out of stock
Chrome wheel nut for all original Mamba and Revolution wheels except 13".
Overall length is 48mm
Sleeve length is 32mm
Sleeve diameter is 13.8mm
The washer is 2.3mm thick and outside diameter is 24mm
55mm wide chrome centre cap with 40mm face with leyland "ST" logo centre as supplied on wheels This fits the ST Minispares Minator 5x10 and 6x10 8 spoke wheel, which have a flat fronted outer rim as per all the ST designs since 25/09/04 but now has a...
For the latest 12" Revolution whels with a 67mm centre cap introduced on 2004
Cover those ugly tire valve stems with alloy caps in your choice of colors; MTC3=silver, MTC4=gold MTC5=red, MTC6=blue.
Chrome wheel nut for 13" Revolution except RFX type wheel.
16.9mm Shank diameter
34.7mm Shank depth
3.7mm Washer thickness
The original stock nut has a very small area of contact to absorb all the loads of cornering, etc. Our special "wide seat" nuts almost double the contact area! The first designs (Bugeye) use a flatter seat than the more common "Rostyle" type. Chrome ...
Genuine revolution centre cap for RFX 12" wheel only with 55mm hole.
Longest one piece stud available, 78mm long with 27mm thread. Can be used on later wider brake drum but with 3/4"(19mm)spacers only. Available as a kit as CW17. The shank length from under the bolt head is 78mm with 30mm thread.
Many aftermarket wheels, when combined with wide tires, will require the use of spacers to avoid tire rub. Spacers are sold by the pair and this the widest available at 32mm wide and have studded wheel bolts because of the extra length, must not be u...
For the front and rear of all early cars up to 1984 and except those with spacered rear drums fitted which took the longer rear stud 21A1278.
This popular stud has found its way on any year mini and lengths being the only deciding factor. Th...
Original minilife wheels had black on white stickers for the alloy cap with decal size of 49.7mm but this is the new ST logo plastic type cap sticker which is 55mm. The plastic cap number is C-21A1962.
This was the old Leyland S...
Minispares own stainless steel wheel nut and zinc plated washer for some Mamba and Revolution wheels except 13".
Shank length under the flat washer is 28mm. Shank diameter is 13.9mm.
A plastice chrome centre cap for our Special Tuning wheels--from October 2004 the design was slightly improved with a cleaner look rather than the old 1960 magnesium rough finish appearance and at that time the cap was changed from alloy to plastic f...
Yokohama's ultimate in 10" tyre performance, the A032-R Aqua Tusk tyres feature a soft compound rubber and aggressive tread pattern for utlimate grip and high speed stability.
These are DOT approved, road legal competition and per...
A popular inexpensive 10" tyre which will fit all widths of wheels upto 6" wide.
If you have original 3.5" wide standard wheels see TYRE24.
EU label information
Rolling resistance F
Not much choice on 13" wheels now bridgestone have discontinued the Mini size but don't worry as this was everybodies favourite for alround motoring. Also see TYRE25 for the AO48R type from Yokohama.
EU label informat...
Our 5x10 8 spoke wheel has a flat fronted outer rim as per all our designs but since 25/09/04 has a diamond cut edge and does NOT include wheel nuts. It requires PRE 1984 type rounded angle nuts which were fitted as standard upto 1984 (88G32...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.