Solid version of NAM9075 chrome plated without the troublesome stainless steel cover that gets destroyed by air tools and 12 point sockets. This uses 17mm socket.

Wheel spacer for our Rosepetal alloy wheel, see C-21A1071 for more info.



7.4mm

For the latest 10" Revolution wheels with a 61mm centre cap introduced on 2004

Cover those ugly tire valve stems with alloy caps in your choice of colors; MTC3=silver, MTC4=gold MTC5=red, MTC6=blue.

The original stock nut has a very small area of contact to absorb all the loads of cornering, etc. Our special "wide seat" nuts almost double the contact area! The first designs (Bugeye) use a flatter seat than the more common "Rostyle" type. Chrome ...

The original mini wheel nut with a round seating was fitted from 1959 until 1984 when they changed to a 60 Degree straight seating wall. This later nut was 113087. 10" wheels with plastic hub caps used a strange looking nut to hold the c...

Wheel bolt for Minilites.

The Minilite company has gone through some very difficult times over the last number of years and all the changes of ownership have caused severe supply problems. These are 15.75mm wide 38mm long shank with overa...

This is the correct length for all minis using the rear spacered type drum which was fitted to all Cooper "S" 1275GT and every mini from 1984 to 1996 except the ERA Turbo and Sportspac cars which had 13" wheels. Stud shank length from under head of b...

Many aftermarket wheels, when combined with wide tires, will require the use of spacers to avoid tire rub. Spacers are sold by the pair and this the widest available at 32mm wide and have studded wheel bolts because of the extra length, must not be u...

last few-Original minilife black on white 49.7mm(50mm) wide sticker for the old centre caps which have now been changed to C-21A1962 alloy cap with ST decal size of 50mm.For "ST" stick on badge see[linkSTICKER25[/link]

The new p...